I-8092 High Speed 2 Axis Motion Control Module

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

High Speed 2 Axis Motion Control Module

THÔNG TIN SẢN PHẨM

I-8092 High Speed 2 Axis Motion Control Module

Features

The I-8092 is a 2-axis stepping/pulse-type servo motor control module that can be used on any of the ICPDAS I- 8000, Wincon, and Lincon series controllers. It is suitable for general-purpose motion applications. Apart from a wide speed range, this intelligent motion controller also has a variety of built in motion control functions; such as: 2-axis linear interpolation, 2-axis circular interpolation, and T/S-curve acceleration/deceleration. Most of the I-8092F motion control functions are performed with little load on the processor. While driving the motors, the motion status, and the other I/O status on the I-8000, the Wincon, or Lincon modules, can still be monitored. As a result of the low CPU loading requirements of the I-8092, one or more motion modules may be used on a single I-8000, Wincon, or Lincon controller. ICPDAS has also provided a wide range of functions and examples to reduce the need for programming by users, making it a highly cost-effective solution for motion builders.

Independent 2-axis motion control
Support for hand wheel and jog functions
2-axis linear interpolation function
2-axis circular interpolation function
Continuous interpolation function
Programmable T/S-curve acceleration and deceleration
A maximum of 4M pps pulse output rate for each axis
Pulse output types: CW/CCW or Pulse/Direction
32-bit encoder counter for each axis
Encoder pulse input types: A/B phase or Up/Down
Programmable automatic homing for each axis
Position comparison management and software limits
Applications
- X-Y-Z Table
- Fix-Pitch Stamping Machine
- Transfer Machine
- Spinner
- Loader/Unloader

I-8092 High Speed 2 Axis Motion Control Module

I-8092 High Speed 2 Axis Motion Control Module

Features

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng