I-87026PW-G CR: Module 6 kênh đầu vào tương tự AI + 2 kênh đầu ra tương tự AO + 2 kênh đầu vào số DI + 2 kênh đầu ra số DO

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

I-87026PW-G CR 6-ch AI, 2-ch AO, 2-ch DI and 2-ch DO Module (RoHS)

Gọi +84 904251826 để được trợ giúp

I-87026PW-G CR: Module 6 kênh đầu vào tương tự AI + 2 kênh đầu ra tương tự AO + 2 kênh đầu vào số DI + 2 kênh đầu ra số DO

Features

• Multifunction (6AI, 2AO, 2DI and 2DO)
• Supports Fast Mode and Normal Mode
• Individual Channel Configuration
• Open Wire Detection for Current Output
• Overload and Short Circuit Protection for Digital Output
• Configurable Power-on Value Settings
• Configurable Safe Value Settings
• 240 Vrms Overvoltage Protection for Voltage Input
• 70 VDC Overvoltage Protection for Digital Input
• Jumper Selectable Voltage or Current Input/Output
• Dual Watchdog
• ±4 kV Contact ESD Protection
• Wide Operating Temperature Range: -25 °C ~ +75 °C

Introduction

The 87026PW is a multifunction module that includes 6 analog input channels, 2 analog output channels, 2 digital input channels, 2 digital output channels. It provides a programmable input range on all analog input (+/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA, 0 ~ 20 mA or 4 ~ 20 mA), analog outputs are 12 bit at +/-5 V, +/-10 V, 0 ~ 20 mA or 4 ~ 20 mA and all digital outputs can be set as alarm output. Each analog input can be configured for an individual range and provides a high overvoltage protection of 240 Vrms. Voltage and current inputs/outputs are jumper selectable.

Specificaiton

CPU Module
Watchdog Timer Yes, Module (1.6 Seconds), Communication (Programmable)

 

Isolation
Intra-module Isolation 2500 VDC

 

EMS Protection
ESD (IEC 61000-4-2) ± 4 kV Contact for Each Terminal
±8 kV Air for Random Point

 

LED Indicators
Status 1 x Power and Communication
16 x I/O

 

Analog Input
Channels 6 (Differential)
Type Voltage
Current
Range +/-150mV, +/-500 mV, +/-1V, +/-5 V, +/-10 V +/-20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Jumper Selectable)
Resolution Normal Mode: 16-bit
Fast Mode: 12-bit
Accuracy Normal Mode: ±0.1% of FSR
Fast Mode: ±0.5% or better
Sampling Rate Normal Mode: 10 Samples/Sec.
Fast Mode: 60 Samples/Sec. (Total)
Bandwidth Normal Mode: 15.7 Hz
Fast Mode: 78.7 Hz
Input Impedance Voltage: 2 MΩ
Current: 125 Ω
Common Mode Rejection 86 dB Min.
Normal Mode Rejection 100 dB
Overvoltage Protection 240 Vrms
Individual Channel Configuration Yes
Zero Drift ±20 μV/°C
Span Drift ±25 ppm/°C

 

Analog Output
Channels 2
Type Voltage
Current
Range +0 V ~ +5 V, +/-5 V, +0 V ~ +10 V, +/-10 V,+0 mA ~ +20 mA, +4 mA ~ +20 mA (Jumper Selectable)
Resolution 12-bit
Accuracy ±0.1% of FSR
Open Wire Detection Yes, +4 ~ +20 mA
Current Load Resistance 500 Ω
Power on Value Yes
Safe Value Yes

 

Digital Input/Counter
Channels 2
Type Wet contact
Sink/Source (NPN/PNP) Sink
Wet Contact, ON Voltage Level +3.5 VDC ~ 50 VDC
Wet Contact, OFF Voltage Level +1 VDC Max.
Max. Counts 32-bit
Frequency 100 Hz
Min. Pulse Width 5 ms
Input Impedance 10 KΩ, 0.66W
Overvoltage Protection 70 VDC

 

Digital Output
Channels 2
Type Isolated Open Collector (Sink)
Load Voltage +3.5 VDC ~ +50 VDC
Max. Load Current 700 mA/channel Max.
Overvoltage Protection 60 VDC
Overload Protection Yes
Short-Circuit Protection Yes
Power on Value Yes, Programmable
Safe Value Yes, Programmable

 

COM Ports
Ports 1 x RS-485
Baud Rate 1200 ~ 115200 bps
Data Format N, 8, 1
Protocol DCON

 

Power
Consumption 1.8 W Max.

 

Mechanical
Dimensions (mm) 30 x 102 x 115 (W x L x H)

 

Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 5 ~ 95% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

I-87026PW-G     CR  6-ch AI, 2-ch AO, 2-ch DI and 2-ch DO Module (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: