I-87063W-G CR: Module 4 kênh đầu vào số DI + 4 kênh đầu ra Power Relay

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

I-87063W-G CR 4-ch Isolated DI (Wet) and 4-ch Form C Power Relay Module (RoHS)

THÔNG TIN SẢN PHẨM

Features

• 4-channel Digital Input and 4-channel Relay Output
• Form C Power Relay Output
• Sink- and Source-type Digital Input Channels
• Digital Input Channels can be used as 16-bit Counters
• Configurable Power-on Value
• Configurable Safe Value
• 4 kV ESD Protection
• 3750 VDC Intra-module Isolation
• RoHS Compliant
• Wide Operating Temperature Range: -25 to +75°C

Introduction

The I-87063W module provides 4 isolated Digital Input channels and 4 Form C Relay Output channels. All Digital Input channels can be used as 16-bit counters. In addition, either sink- or source-type Digital Input can be selected via the wire connections. The I-87063W includes 8 LED indicators that can be used to monitor the status of the Digital Input and Relay Output, and options are available for configuring power-on and safe values. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enhance the noise protection capabilities of the module in harsh industrial environments.

Specification

CPU Module
Watchdog Timer	Yes, Module (1.6 Seconds), Communication (Programmable)

Isolation
Intra-module Isolation	3750 Vrms

EMS Protection
ESD (IEC 61000-4-2)	± 4 kV Contact for Each Terminal ±8 kV Air for Random Point

LED Indicators
Status	1 x Power and Communication 8 x I/O

Digital Input
Low Pass Filter	Yes

Digital Input/Counter
Channels	4
Type	Wet Contact
Sink/Source (NPN/PNP)	Sink, Source
Wet Contact, ON Voltage Level	+3.5 VDC ~ +30 VDC
Wet Contact, OFF Voltage Level	+1 VDC Max.
Max. Counts	16-bit (65535)
Frequency	100 Hz
Min. Pulse Width	5 ms
Input Impedance	3 kΩ, 0.25 W

Relay Output
Channels	4 (Form C)
Type	Power Relay
Contact Rating	Form C: 5 A (NO)/3 A (NC) @ 30 VDC (Resistive Load) 5 A (NO)/3 A (NC) @ 277 VAC (Resistive Load)
Operate Time	10 ms (Max.)
Release Time	5 ms (Max.)
Electrical Endurance	1 × 105 ops.
Mechanical Endurance	5 × 106 ops.
Power on Value	Yes
Safe Value	Yes

COM Ports
Ports	1 x RS-485
Baud Rate	1200 ~ 115200 bps
Data Format	N, 8, 1
Protocol	DCON

Power
Consumption	1.5 W Max.

Mechanical
Dimensions (mm)	30 x 102 x 115 (W x L x H)

Environmental
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-40 ~ +85 °C
Humidity	10 ~ 95% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

I-87063W-G CR

4-ch Isolated DI (Wet) and 4-ch Form C Power Relay Module (RoHS)

I-87063W-G CR: Module 4 kênh đầu vào số DI + 4 kênh đầu ra Power Relay

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng