Module 2 kênh Counter/Frequency ICP DAS I-87082-G CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

2-ch Counter/Frequency Input Module

THÔNG TIN SẢN PHẨM

I-87082-G CR đã dừng sản xuất và được thay thế bằng I-87082W-G CR

EOL Notification

Feature

• 2-channel Counter/Frequency Input
• 32-bit Counter
• Isolated or Non-isolated Input
• Programmable Alarm Output
• Programmable Digital Filter
• Programmable Threshold Voltage Level
• Maximum Frequency of up to 100 kHz
• Dual Watchdog

Introduction

The I-87082 offers 2 high speed counter or frequency input channels and 2 digital output channels. Two types of digital input are provided, one for isolated input, and the other is for nonisolated input. The isolated input provides 3750 Vrms isolation voltage and the non-isolated input provides programmable threshold voltage level. The built-in digital filter is valid for both non-isolated and isolated input and can filter out noise where the high/low pulse width is smaller than the minimum high/low width of the digital filter. The maximum count is up to 32-bit and the maximum frequency is up to 100 kHz. The module also provides programmable alarm output with non-isolated open collectors.

Application

• Building Automation
• Factory Automation
• Machine Automation
• Remote Maintenance
• Remote Diagnosis
• Testing Equipment

Specifications

CPU Module
Watchdog Timer	Yes, Module (1.6 Seconds), Communication (Programmable)

Isolation
Intra-module Isolation	3750 Vrms

LED Indicators
Status	1 x Power and Communication 8 x I/O

Digital Output
Channels	2
Sink/Source (NPN/PNP)	Sink, Open Collector
Load Voltage	+5 VDC ~ +30 VDC
Load Current	30 mA

Counter/Frequency/Encoder Input
Channels	2
Type	Counter or Frequency
Counter Mode	Up
Counter/Encoder Bits	32-bits (4,294,967,295)
Max. Counter/Frequency	100 kHz
ON Voltage Level	Sensor Type: +3.5 VDC ~ +30 VDC Non-isolated: 0 ~ +5 VDC (Default > 2.4 VDC) 0 ~ +5 VDC (Default < 0.8 VDC)
OFF Voltage Level	Sensor Type: +1 VDC Max. Non-isolated: 0 ~ +5 VDC (Default > 2.4 VDC)
Frequency Accuracy	1 Hz or 10 Hz (software selectable)
Programmable Alarm Mode	Mode 0: High Alarm Comparator on Counter 0 and Counter 1 Mode 1: Two Steps High Alarm Comparator on Counter 1
Low Pass Filter	2 ~ 65000 μs

COM Ports
Baud Rate	115200 bps
Data Format	N, 8, 1
Protocol	DCON

Power
Consumption	0.9 W Max.

Mechanical
Dimensions (mm)	31 x 116 x 88 (W x L x H)

Environment
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-30 ~ +75 °C
Humidity	5 ~ 95% RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

I-87082-G CR

2-ch Counter/Frequency Input Module (Gray Cover) (RoHS)

Module 2 kênh Counter/Frequency ICP DAS I-87082-G CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng