Module 3 trục bộ đếm tốc độ cao Counter ICP DAS I-9093 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

3-axis High-speed Encoder Module with Compare Trigger Output

THÔNG TIN SẢN PHẨM

Tính năng

• 3-axis, 32-bit Encoder Counter
• Maximum Counting Rate: 6 MHz
• Encoder Input: A, B, C Differential
• Encoder Mode: Quadrant, CW/CCW, PULSE/DIR
• Compare Trigger Output
• Selectable Reset/Latch Signal Inputs
• 4 kV ESD Protection
• Wide Operating Temperature Range: -25 to +75°C

Giới thiệu

I-9093 includes 3-axis encoder with compare trigger output function. It can generate a periodic trigger signal when the motor reaches a specified position. The specified position is called a breakpoint and is similar to a switch that is triggered after the motor passes a certain position. To use the compare trigger output function, you have to set an initial point (P) and a trigger period of the following points (D). The trigger signal is an I/O line that can be used to fire another device. For example, when a motor reaches a certain position, the trigger signal can be used to fire the shutter of a camera to capture an image for the defect detection. All operations of position compare and trigger pulse output are automatically done by the hardware circuit. There is no software calculation effort when the system is operating. I-9093 makes the system design simpler, and significantly increases the system performance.

Thông số kỹ thuật

Isolation
Intra-module Isolation	3000 VDC

EMS Protection
ESD (IEC 61000-4-2)	±4 kV Contact for each Terminal ±8 kV Air for Random Point

LED Indicators
Status	1 x Power and Communication 12 x Status

Encoder Input
No. of Axes	3
Response Speed	Quadrant: 2 MHz Max. CW/CCW: 6 MHz Pulse/Dir: 6 MHz
Resolution	32-bit
Programmable Digital Filter	1 ~ 250 μs
Photo-isolation	2500 VDC
Mode	Quadrant , CW/CCW , Pulse/Dir
Input Level	ON Voltage Level: +3.5 VDC ~ +5 VDC Or 10 VDC ~ 24 VDC (Jumper Select) OFF Voltage Level: +0.8 VDC Max.

Compare Trigger Output
Channels	3
Load Voltage	5 ~ 48 V
Max. Load Current	100 mA
Trigger Pulse Width	10 μs ~ 128 μs

External Latch Input
Channels	3
Input Level	ON Voltage Level: +3.5 VDC ~ +5 VDC or +10 VDC ~ +24 VDC (Jumper Select) OFF Voltage Level: +0.8 VDC Max.

Power
Consumption	2 W Max.

Mechanical
Dimensions (mm)	31 x 134 x 144 (W x L x H)

Environment
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-40 ~ +85 °C
Humidity	10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Thông tin mua hàng

I-9093 CR

3-axis High-speed Encoder Module with Compare Trigger Output (RoHS)

Module 3 trục bộ đếm tốc độ cao Counter ICP DAS I-9093 CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng