Module 1 cổng CAN ICP DAS I-9120 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

1-port CAN Programmable Module

THÔNG TIN SẢN PHẨM

Features

Common Features

Support WP-9x21-CE7 (driver for LinPAC and XPAC will be Available Soon)
Allow user to program user-defined firmware in I-9120

CAN Port Features

2500 Vrms photo-isolation protection on CAN side
Compatible with CAN specification 2.0 parts A and B
Provide default baud rate: 10k, 20k, 50k, 125k, 250k, 500k, 800 k, 1 M bps
Allow user-defined baud rate
Cyclic transmission precision: ±0.5ms precision when cyclic time is below 10ms , ±1% error when cyclic time exceeds 10ms
Provide 5 sets of cyclic transmission

Software Utility Features

Utility tool for downloading user-defined firmware and updating default firmware
Provide eVC++4.0, VC6, VC++ 2005, C#.net 2005, VB.net 2005 demos and library

Introduction

The CAN (Controller Area Network) is a serial communication bus especially suited to interconnect smart devices to build smart systems or sub-system. It efficiently supports distributed real-time control with a very high level of security. In CAN networks, there is no addressing of subscribers or stations in the conventional sense, but instead prioritized messages are transmitted. As standalone CAN controller, I-9120 with WinPAC-9000-CE7 series MCU (main control unit) represents an economic solution. It has one CAN communication port with 5-pin screw terminal connector, and is useful for a wide range of CAN applications. Besides, I-9120 uses the new Phillips SJA1000T and transceiver 82C250, which provide both CAN 2.0A and 2.0B specific, re-transmission function, bus arbitration and error detection. Combining the benefits of WinPAC-9000-CE7 series MCU without increasing the CPU loading heavily, it could be a powerful multi CAN port programmable device server by driving the program in the 186 CPU of I-9120. It can also communicate with other kinds of communication interface, such as RS-232/RS-485/Ethernet ports to be a programmable device server. Therefore, users can design the various applications between different communication protocols.

Specifications

Software
Driver	WP-9000-CE7
Library	TC/BC/TC++/BC++, eVC++ 4.0, VC++ 2005, C#.net 2005, VB.net 2005

CPU Module
CPU	80186, 80 MHz or compatible
EEPROM	16 KB
Flash	512 KB
SRAM	512 KB
Watchdog Timer	Watchdog IC

LED Indicators
Status	1 x Power 1 x CAN status 1 x Operating mode

CAN
Controller	NXP SJA1000T with 16 MHz clock
Transceiver	NXP 82C250
Baud Rate	10 k ~ 1 M bps
Isolation	3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor	Switch for 120 Ω terminal resistor
Specification	ISO-11898-2, CAN 2.0A and CAN 2.0B

Power
Consumption	1.5 W

Mechanical
Dimensions (mm)	31 x 91 x 115 (W x L x H)

Environmental
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-30 ~ +80 °C
Humidity	10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering Information

I-9120 CR

1-port Programmable CAN Module (Parallel Bus Type) (RoHS)

Module 1 cổng CAN ICP DAS I-9120 CR

Features

Common Features

CAN Port Features

Software Utility Features

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng