| Standard & Protocol |
IEEE 802.3 for 10Base-T
IEEE802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
3GPP Rel-15 for 5G NR
3GPP Rel-14 for 4G LTX
3GPP Rel-18 for 3G WCDMA
IEEE802.11b/g/n/a/ac for WLAN
IEEE802.11i for wireless security
IEEE802.11r for fast roaming
IEEE802.3af/at for PoE/PoE+ |
| WAN mode |
Link backup (access to Internet by WAN network or 5G dialing, WAN supports DHCP/static IP/PPPoE dialing)
WiFi & 4G/5G roaming (wireless roaming or access to Internet by 5G dialing) |
| Cellular network |
3G/4G/5G cellular network, network type 5G NR / LTE FDD/ LTE TDD/ WCDMA / TD-SCDMA / CDMA / EVDO |
| WLAN |
WAP/WAP2 personal/enterprise edition encryption mode, hidden wireless SSID, wireless user isolation, wireless transmission power adjustment, maximum user limit, packet segmentation and RTS threshold, China/US wireless channel, WMM |
| Management |
Mobile network detection, local area network, dynamic domain name, UPnP settings, static DHCP, QoS, log management, device alias, access settings, timed restart, backup and recovery, firmware upgrade |
| Security Policy |
Wireless user black/white list, wireless user event notice, IP filtering, MAC filtering, URL filtering, keyword filtering, IP address black/white list, port forwarding, port redirection, DMZ settings |
| VPN Tunnel |
GRE, PPTP Client/Server, L2TP Client/Server, IPSec |
| Multicast |
Multicast Translate |
| Troubleshooting |
System Log, Ping Test and Route Tracking |
| Routing Technique |
VRRP, RIP, OSPF, routing list settings |
| Time Management |
DHCP Client |
| WiFi Radio Frequency |
802.11B/g/n: 2.412GHz~2.4835GHz
802.11Ac/n/a: 5.18GHz~5.825GHz
RF power output: 20dBm
Modulation methods: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM, 256-QAM |
| WiFi Receiving Sensitivity |
802.11n_HT40: -82dBm@MCS0,-64dBm@MCS7
802.11n_HT20: -85dBm@MCS0,-67dBm@MCS7
802.11g/a: -91dBm@6Mbps,-72dBm@54Mbps
802.11b: -93dBm@1Mbps,-87dBm@11Mbps
802.11ac: -84dBm@MCS0,-59dBm@MCS9 |
| WiFi Transmitting Power |
802.11n_HT40: 23dBm@MCS0,20dBm@MCS7
802.11n_HT20: 23dBm@MCS0,20dBm@MCS7
802.11g/a: 23dBm@6Mbps,20dBm@54Mbps
802.11b: 23dBm@1Mbps,20dBm@11Mbps
802.11ac: 23dBm@MCS0,20dBm@MCS9 |
| 5G NR Operating Frequency Band |
5G NR: n1/n2/n3/n5/n7/n8/n12/n20/n28/n38/n40/n41/n48/n66/n71/
n77/n78/n79
4G LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B9/B12/B13/B14/B17/B18/B19/
B20/B25/B26/B28/B29/B30/B32/B66/B71
4G LTE-TDD: B34/B38/39/B40/B41/B42/B48
3G WCDMA: B1/B2/B3/B4/B5/B6/B8/B19 |
| 5G NR Bandwidth (downward, upward) |
5G SA: DL 2.1Gbps,UL 900Mbps
5G NSA: DL 2.5Gbps,UL 650Mbps
LTE: DL 1Gbps,UL 200Mbps
WCDMA: DL 42Mbps,UL 5.76Mbps |
| Interface |
Gigabit copper port: 3 10/100/1000Base-T(X) self-adaptive RJ45 LAN ports, support automatic flow control, full/half duplex mode, MDI/MDI-X self-adaption
Gigabit COMBO port: 1 10/100/1000Base-T(X) self-adapting RJ45 port or 1000 Base-X SFP slot, it’s WAN port by default; The copper port supports automatic flow control, full/half duplex, MDI/MDI-X self-adaptation, and support PoE power receiving
Antenna interface: 2 2.4G antenna interfaces, RP-SMA-K(Female)
2 5.8G antenna interfaces, RP-SMA-K(Female)
4 5G Sub-6G antenna interfaces, SMA-K(Female)
USB port: 1 Type-A USB 2.0 Female, this interface is reserved
SIM cart slot: 1 Micro SIM card slot and 1 Nano SIM card slot, redundant backup; 1 Micro-SD card Slot for reservation
Console port: CLI command line management port(RS-232), RJ45
Alarm port: 6-pin 5.08mm pitch terminal blocks (2 pins for relay), support 1 relay alarm output, this interface is reserved |
| Indicator |
Running indicator, alarm indicator, power indicator, 2.4G indicator, 5.8G indicator, Wireless bridge signal strength indicator, interface indicator, PoE indicator, 5G indicator, 5G bridge signal strength indicator, USB indicator, SD card indicator, SIM card indicator |
| Power Supply |
WAN port: supports PoE power receiving, which conforms to IEEE802.3af/at standard
Power supply terminal: supports 12~48VDC single power and dual power input, supports input redundancy and nonpolarity, adopting 6-pin 5.08mm pitch terminal block(4-pin power supply) |
| Power Consumption |
No-load: 6.5W@24VDC
Full-load: 20.0W@24VDC |
| Working Environment |
Operating temperature: -40~75℃
Storage temperature:-40~85℃
Relative humidity: 5%~95% (no condensation) |
| Physical Characteristic |
Housing: IP40 protection, metal
Installation: DIN-Rail mounting
Dimension (W x H x D): 88mm×150mm×135mm
Weight: 1.68kg |
| Industrial Standard |
IEC 61000-4-2 (ESD, electrostatic discharge), Level 3
Air discharge:± 8kV
Contact discharge: ±6kV
IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3
Power supply: ±2kV
Ethernet port: ±1kV
IEC 61000-4-5 (Surge), Level 3
Power supply: common mode±2kV, differential mode±1kV
Ethernet interface: ±2kV
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6 |
| MTBF |
>250000 hours |
| Authentication |
CE, FCC, RoHS |
