Module thu thập dữ liệu không dây iWSN + 3 kênh cảm biến dò rỉ chất lỏng ICP DAS iWSN-930R-LK-AC-IP33 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

iWSN 3-channel Liquid Leak Detection Module

Gọi +84 904251826 để được trợ giúp

Module thu thập dữ liệu không dây iWSN + 3 kênh cảm biến dò rỉ chất lỏng ICP DAS iWSN-930R-LK-AC-IP33 CR

Feature

  • Supports 3-channel Liquid Leak Detection
  • Detection sensitivity adjustable
  • Three LED indicators to display the status of the power, wireless communication and the alarm
  • Relay Output and Buzzer Alarm for Liquid Leakage Alarm
  • A mute junction to silence the Buzzer Alarm
  • Liquid Leak Detection Cable and Extended Cable can be up to 500 meters
  • Uses 433 MHz radio frequency for communication
  • 16 RF Channels and 4 Group ID, consist of maximum 64 RF sub-networks
  • Support AC power supply without external power transformer

Introduction

The iWSN-930R-LK-AC-IP33 module is a wireless liquid leakage detection module that supports AC power supply. It provides 3-channel liquid leakage detection and Buzzer Alarm, and periodically report the detection status to the iWSN-200 series module through the Sub-1GHz RF communication interface, and the user can read back the detection status from the iWSN-200 series module through the Modbus protocol.

Application

The iWSN-930R-LK-AC-IP33 module is a wireless liquid leakage detection module that supports AC power. It is suitable for liquid leakage detection in building drainage pipes, sewage pipes or domestic water pipes, fire water pipes, etc. The module will periodically report the detection status to the iWSN-200 series module through the wireless interface. The SCADA of the central monitoring center can read back the detection status from the iWSN-200 series module through Modbus. When the module detects liquid leakage, it will sound out an audible alarm on site to remind the on-site personnel to deal with it, and actively report the liquid leakage status to the iWSN-200 series module so that the central monitoring center can read this status to notify relevant personnel.

This module can not only effectively meet the needs of water saving, but also quickly detect liquid leakage on site, avoiding personnel slipping and injury or electrical equipment from short-circuit damage due to excessive liquid leakage.

Specifications

EMS Protection
EFT (IEC 61000-4-4) ± 500 V
± 1 kV for power liner
ESD (IEC 61000-4-2) ± 4 kV Contact
Surge (IEC 61000-4-5) ± 1 kV
LED Indicators
Status 1 x Power
1 x Tx
1 x Alarm
System
Alarm For both liquid leak detection and cable-break detection.
Buzzer Yes.
Can be muted by shorting circuit mute junction.
Relay Output Signal Relay, Form C x 1, SPDT
0.5 A @ 125 VAC
2 A @ 30 VDC
Liquid Leak Detection
Channels 3
Liquid Type Water, 2uS/cm
Sensor Type Probe for point detection or Cable for line detection
Max. Cable Length 500 meters
Include Liquid Leak Detection Cable and Extended Cables.
Sensitivity Range 25 segments (adjustable by rotary switch)
Cable-break Detection Yes. For Liquids Leak Detection Cable CA-LLD-DC100X-Lxxx only.
RF
Channels 0 ~ 15 configured by DIP switch
Group ID 0 ~ 3 configured by DIP switch
Radio Frequency 433.1000 ~ 434.6000 MHz
Transmission Distance (LoS) 100 m
Node ID 1 ~ 31 configured by DIP switch
Working Duty 1 sec, 10 sec, 30 sec and 60 sec configured by DIP switch
Antenna
Type Built-in Omni-directional antenna
Power
Consumption 110 VAC @ 60 Hz , 28 mA , 3.08 W
Input Type 100 ~ 240 VAC 50/60 Hz
Mechanical
Dimensions (mm) 85 x 184 x 47 (W x L x H)
Installation Wall-mount
Ingress Protection Rating IP33
Environment
Operating Temperature -20 ~ +50 °C
Storage Temperature -30 ~ +55 °C
Humidity 10 ~ 90% RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

iWSN-930R-LK-AC-IP33  CR  iWSN 3-channel Liquid Leak Detection Module (RoHS) (Asia Only)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: