Module đo dòng không dây iWSN + 6 CT 200A ICP DAS iWSN-9603-240-ME-IP33 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

iWSN Wireless 3-phase 2-loop intelligent power meter

Gọi +84 904251826 để được trợ giúp

Module đo dòng không dây iWSN + 6 CT 200A ICP DAS iWSN-9603-240-ME-IP33 CR

Feature

  • 2-ioop 3-phase or 4-loop single-phase AC circuits measurement
  • Provides 6 200A split current transformers (CT)
  • 3P4W, 3P3W, 3P3W 2CT, 1P3W or 1P2W wiring types
  • Bi-direction kWh measurement
  • True RMS calculations for voltage and current signals
  • Powers by the measured voltage cable; no extra power wiring is needed
  • Built-in 2A Fuse to keep the main circuit safe
  • Timestamp for each measured data by the built-in RTC
  • 3-minute history data cache for supplement
  • Uses 433MHz radio frequency and provides max. 64 wireless sub-network.
  • IP33 protection to prevent from circuit short by fire sprinkler system
  • Connector cover to avoid the exposed connector and electric shock

Introduction

The iWSN-9603 series module is a 3-phase AC power meter, which provides one 3-phase voltage input and two 3-phase 100A current CT inputs, and suits measuring the power information of different equipment powered by the same AC source. By means of wireless communication and powering from the measured voltage cable, it can greatly reduce the cost and duration of installation, and satisfy to the demand of distributed deployment and quick setup. Moreover, the features of Sub-GHz radio frequency and data supplement mechanism effectively improve the reliability of the wireless communication especially in the crowed or seriously shielded space of the factory environment. Consider the maintenance and installation issues, the iWSN-9603 series module is configured by the DIP switches, and uses special housing with IP33 protection to avoid the circuit short while the fire sprinkler system is activated if the module is located out of the panel box. Through the design of RTC and data timestamp, the iWSN-9603 series can fit the power saving applications, such as machine and process power efficiency improvement, power information administration, calculation of carbon emission, predictive maintenance, and big data analysis of power consumption.

Application

  • Machine and process power efficiency improvement
  • Power information administration
  • Calculation of carbon emission
  • Predictive maintenance
  • Big data analysis of power consumption

Specifications

EMS Protection
EFT (IEC 61000-4-4) +/- 500 V
ESD (IEC 61000-4-2) +/- 4 kV Contact
LED Indicators
Status 1 x Power
1 x Tx
1 x Error
AC Power Measurement
Wiring 3P4W-3CT, 3P3W-2CT, 3P3W-3CT, 1P2W-1CT, 1P3W-2CT
Loops 4 (Single Phase)/ 2(Three Phase)
Input Voltage Three phase 4 wire x1, 100 - 480 VAC (58 - 277 VAC single phase)
Input Current CTØ24 mm (1A ~ 200 A)
Input Frequency 50/60 Hz
Wh Accuracy Better than 1% (PF=1)
Power Parameter Measurement True RMS voltage (Vrms), True RMS current (Irms), Active Power (kW), Active Energy (kWh), Power Factor (PF), Frequency
Data Update Rate 1, 10, 30, or 60 Seconds
CT
Includes CTs 6
Type Split core CT
Max. Current 200A
Inside Diameter 24mm
Leading Cable 8m
RF
Channels 0 ~ 15
Group ID 0 ~ 3
Radio Frequency 433.1000 ~ 434.6000 MHz
Transmission Power 9±1dBm (PA Off) / 18±1dBm (PA On)
Transmission Distance (LoS) 100 m
Node ID 1 ~ 31
Working Duty 1, 10, 30, or 60 Seconds
Antenna
Type Built-in Omni-directional antenna
Power
Consumption 3W
Input Type Three phase 100 - 480 VAC (58 - 277 VAC single phase)
Mechanical
Dimensions (mm) 85 x 184 x 47 (W x L x H)
Installation Wall-mount
Ingress Protection Rating IP33
Environment
Operating Temperature -30 °C ~ +50 °C
Storage Temperature -40 °C ~ +55 °C
Humidity 10 ~ 90% RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

iWSN-9603-240-ME-IP33     CR  iWSN Wireless 3-phase 2-loop intelligent power meter; Includes 200A CT (Inside diameter 24 mm; wire lead 8 m) x 6 (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: