Module RS-485 Modbus RTU 10 kênh đầu vào tương tự AI (Dòng điện, điện áp, cặp nhiệt) ICP DAS M-7018Z-G/S2 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

10-ch Thermocouple Input Module

Gọi +84 904251826 để được trợ giúp

Module RS-485 Modbus RTU 10 kênh đầu vào tương tự AI (Dòng điện, điện áp, cặp nhiệt) ICP DAS M-7018Z-G/S2 CR

Features

• 10-channel Analog Input
• Temperature Output Consistency
• Stable Temperature Output in the Field
• Current, Voltage and Thermocouple Input
• Overvoltage Protection of up to 240 Vrms
• Individual Channel Configuration
• Open Thermocouple Detection
• 4 kV ESD Protection
• 3000 VDC Intra-module Isolation
• Dual Watchdog

Introduction

The I-7018Z/M-7018Z is a 10-channel universal Analog Input module with an RS-485 interface that is especially designed for extremely accurate thermocouple measurement and features automatic cold-junction compensation for each channel to ensure temperature output consistency and stable temperature output in the field. The innovative design of the enhanced model ensures that thermocouple measurement is more accurate than with the earlier design. Besides the thermocouple inputs, the I-7018Z/M-7018Z also supports voltage and current input. The voltage input range can be from +/-15 mV to +/-2.5 V. Up to 10 different types of Analog Input can be connected to a single module. Overvoltage protection of up to 240 Vrms is provided. The module also features per-channel open wire detection for the thermocouple and +4 ~ +20 mA input channels. The M-7018Z provides additional support for both the Modbus RTU and DCON protocols, which can be configured via software, and all hardware specifications are the same as the I-7018Z.
Specification

CPU Module
Watchdog Timer Yes, Module (1.6 Seconds), Communication (Programmable)

 

Isolation
Intra-module Isolation 3000 VDC

 

EMS Protection
EFT (IEC 61000-4-4) ±4 kV to Power
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
Surge (IEC 61000-4-5) ±0.5 kV for Power Line

 

LED Indicators
Status 1 x Power and Communication

 

Analog Input
Channels 10 Differential
Type Voltage
Current
Thermocouple
Sensor Type Thermocouple: J, K, T, E, R, S, B, N, C, L, M, LDIN43710
Temperature Output Consistency Yes
Stable Temperature Output in the Field Yes
Range Voltage: ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V
Current: ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (requires an optional external 125 Ω resistor)
Resolution 16-bit
Accuracy ±0.1% of FSR
Sampling Rate 10 Hz (Total)
Input Impedance > 400 kΩ
Common Voltage Protection ±200 VDC
Overvoltage Protection 240 Vrms
Individual Channel Configuration Yes
Open Wire Detection Yes

 

COM Ports
Ports 1 x RS-485
Baud Rate 1200 to 115200 bps
Data Format (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Protocol Modbus RTU, DCON

 

Power
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC
Consumption 1.0 W

 

Mechanical
Dimensions (mm) M-7018Z: 116 x 73 x 35 (W x L x H)
DN-1822: 96 x 103 x 27 (W x L x D)
Installation DIN-Rail

 

Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing

Download

Data Sheet

Documents

Ordering information

M-7018Z-G/S2     CR  10-ch Thermocouple Input Module using DCON and Modbus Protocols (Gray Cover) (RoHS)
Includes DN-1822 Daughter Board, CA-252518D-1 1.8 m Cable and 4PAPP-006-G

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: