Module 1 kênh đầu ra tương tự 12 bit kết nối RS-485 Modbus RTU & DCON ICP DAS M-7021A

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

1-channel 12-bit Analog Output Module using the DCON and Modbus Protocols

THÔNG TIN SẢN PHẨM

Introduction

The I-7021 is a 12/16-bit, 1-channel Analog Output module that is designed for both voltage and current output. The I-7021 features 3000 VDC intra-module isolation, and the power source for the current output can be selected as either internal or external via a jumper. Options are also provided to allow power-on and safe values to be set. The M-7021A supports both the Modbus RTU and the DCON protocols which can be configured via software, and all hardware specifications are the same as the I-7021.

Features

Current or Voltage Output
High Resolution: 12-bit
Software Selectable Current or Voltage Output
Open Wire Detection for Current Output
Readback Voltage or Current
Configurable Power-on Value
Configurable Safe Value
3000 VDC Intra-module Isolation
Programmable Output Slope
Dual Watchdog
Wide Operating Temperature Range: -25 to +75°C

I/O Specification

Models		I-7021	I-7021P	M-7021A
Analog Output
Channels		1
Wiring		Unipolar
Range	Voltage	0 ~ +10 V,		0 ~ +5 V, 0 ~ +10 V, ±5 V, ±10 V
	Current	0 ~ +20 mA, +4 ~ +20 mA
Resolution		12-bit	16-bit	12-bit
Accuracy		0.1%	0.02%	0.1%
Readback Accuracy		±0.5% of FSR
DA Output Response Time		10 ms
Programmable Output Slope	Voltage	0.0625 ~ 1024.0 V/Second
	Current	0.125 ~ 2048 mA/Second
Current Load Resistance		Internal Power: 500 Ω
		External Power: 1050 Ω
Open Wire Detection (for current only)		Yes
Channel-to-Channel Isolation		-
Short Circuit Protection		Yes
Power-on Value		Yes
Safe Value		Yes

System Specification

Models	I-7021	I-7021P	M-7021A
Communication
Interface	RS-485
RS-485 Bias Resistor	No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format	(N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)	(N, 8, 1)	(N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate	1200 to 115200 bps
Protocol	DCON		Modbus RTU, DCON
Dual Watchdog	Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator	Yes, 1 as Power/Communication Indicator
I/O LED Indicator	-
7-Segment LED Display	-
Isolation
Intra-Module Isolation, Field-to-Logic	3000 VDC
EMS Protection
ESD (IEC 61000-4-2)	±4 kV Contact for each Terminal
EFT (IEC 61000-4-4)	±4 kV to Power Line
Surge (IEC 61000-4-5)	±0.5 kV for Power Line
Power
Reverse Polarity Protection	Yes
Input Range	+10 ~ +30 VDC
Consumption	1.8 W
Mechanical
Dimensions (L x W x H)	123 mm x 72 mm x 35 mm
Installation	DIN-Rail or Wall Mounting
Environment
Operating Temperature	-25 to +75°C
Storage Temperature	-40 to +85°C
Humidity	10 to 95% RH, Non-condensing

Download

Odering information

I-7021 CR	1-channel 12-bit Analog Output Module using the DCON Protocol (Blue Cover) (RoHS)
I-7021-G CR	1-channel 12-bit Analog Output Module using the DCON Protocol (Gray Cover) (RoHS)
I-7021P CR	1-channel 16-bit Analog Output Module using the DCON Protocol (Blue Cover) (RoHS)
I-7021P-G CR	1-channel 16-bit Analog Output Module using the DCON Protocol (Gray Cover) (RoHS)
M-7021A	1-channel 12-bit Analog Output Module using the DCON and Modbus Protocols (Gray Cover) (RoHS)

Module 1 kênh đầu ra tương tự 12 bit kết nối RS-485 Modbus RTU & DCON ICP DAS M-7021A

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng