Bộ đổi nguồn tổ ong 220VAC sang 12VDC, 350W, 29A MCTT-LRS-350-12

Thương hiệu: MCTT | Tình trạng: Còn hàng
Liên hệ

Bộ đổi nguồn tổ ong 220VAC sang 12VDC, 350W, 29A MCTT-LRS-350-12

Gọi +84 904251826 để được trợ giúp

Bộ đổi nguồn tổ ong 220VAC sang 12VDC, 350W, 29A MCTT-LRS-350-12

Features:

  • AC input range selectable by switch
  • Withstand 300VAC surge input for 5 second
  • Protections: Short circuit / Overload / Over voltage/ Over temperature
  • Forced air cooling by built-in DC fan
  • Built-in cooling Fan ON-OFF control
  • LED indicator for power on
  • 100% full load burn-in test
  • High operating temperature up to 70℃
  • High efficiency, long life and high reliability

OUTPUT

 

Model

MCTT-LRS-350-12

DC Voltage

12V

Rated Current

29A

Current Range

0~29A

Rated Power

348W

Ripple&Noise

150mVp-p

VoltageAdj. Range

10~ 13.8V

Voltage Tolerance

±1.5%

Line Regulation

±0.5%

Load Regulation

±1.0%

Setup,Rise Time

1300ms, 50ms/230VAC   1300ms, 50ms/115VAC at full load

Hold Up Time

16ms/230VAC   12ms/115VAC at full load

INPUT

 

Voltage Range

100 ~ 120VAC / 200 ~ 240VAC selected by switch   254 ~ 370VDC (switch on 230VAC)

Frequency Range

47 ~ 63Hz

Efficiency

85%

AC Current

6.8A/115VAC  3.4A/230VAC

Inrush Current

60A/115VAC   60A/230VAC

Leakage Current

<2mA / 240VAC

PROTECTION

 

Over Load

110 ~ 140% rated output power

Protection type: Hiccup mode, recovers automatically after fault condition is removed

Over Voltage

13.8~16.2V

Protection type: Hiccup mode, recovers automatically after fault condition is removed

Over temperature

Hiccup mode, recovers automatically after fault condition is removed

ENVIRONMENT

 

Working Temp.

-20 ~ +70℃ (Refer to “derating curve”)

Working Humidity

20 ~ 90% RH non-condensing

StorageTemp., Humidity

-40 ~ +85℃, 10 ~ 95% RH

Temp. Coefficient

±0.03%/℃ (0 ~ 50℃)

Vibration

10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY

 

Safety Standards

UL60950-1 approved

Withstand Voltage

I/P-O/P:3KVAC   I/P-FG:2KVAC  O/P-FG:0.5KVAC

Isolation Resistance

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH

OTHERS

 

Dimension

215*115*30mm (L*W*H)

Weight

0.76Kg

Packing

15pcs/carton/12.4kg/0.78CUFT

NOTE

 

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. Line regulation is measured from low line to high line at rated load.

5. Load regulation is measured from 0% to 100% rated load.

6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meetsEMC directives.

7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.

Datasheet

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: