Bộ đổi nguồn Din-Rail 220VAC sang 12VDC 40W MCTT-MDR-40-12

Thương hiệu: MCTT | Tình trạng: Còn hàng
Liên hệ

Bộ đổi nguồn Din-Rail 220VAC sang 12VDC 40W MCTT-MDR-40-12

Gọi +84 904251826 để được trợ giúp

Bộ đổi nguồn Din-Rail 220VAC sang 12VDC 40W MCTT-MDR-40-12

Features:

  • Universal AC input/ full range
  • Protections: Short circuit/ Over load/ Over voltage
  • Cooling by free air convection
  • Can be installed on DIN rail TS-35/7.5 or 15
  • isolation classⅡ
  • LED indicator for power on
  • 100% full load burn-in test
  • 1 years warranty

SPECIFICATIONS

OUTPUT

 

Model

MCTT-MDR-40-12

DC Voltage

12V

Rated Current

3.3A

Current Range

0-3.3A

Rated Power

40W

Ripple & Noise

120mVp-p

Voltage Adj. Range

-8%,+10%

Voltage Tolerance

±1%

Setup, Rise Time

500ms,30ms/230VAC500ms,30ms/115VAC at full load

Hold Up Time

50ms/230VAC20ms/115VAC at full load

INPUT

 

Voltage Range

88~264VAC47~63Hz; 124~370VDC

AC Current

1.1A/115V0.7A/ 230V

Efficiency

86%

Inrush Current

Cold start 30A/115V60A/230V

Leakage Current

<1mA/240VAC

PROTECTION

 

Over Load

105%~160%

Protection type: Constant current limiting, recovers automatically after fault condition is removed

Over Voltage

115%~135%

Protection type: Shut down o/p voltage, re-power on to recover

ENVIRONMENT

 

Working Temp., Humidity

-20℃~+60℃; 20%~90%RH

Storage Temp., Humidity

-40℃~+85℃; 10%~95%RH

Temp. Coefficient

±0.03%/℃(0~50℃)

Vibration

10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes

SAFETY

 

Withstand Voltage

I/P-O/P: 3KVAC

Isolation Resistance

I/P-O/P: 100M Ohms / 500VDC

STANDARD

 

Safety Standard

Design refer to UL60950-1,TUV EN60950-1,EN50178

EMC Standard

Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2,EN61204-3

OTHERS

 

Dimension

40*90*100mm(W*H*L)

Weight

0.33Kg

Packing

50pcs/carton

NOTE

 

1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2.Ripple & noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1μ & 47μparallel capacitor.

3.Tolerance: includes set up tolerance, line regulation and load regulation.

4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Datasheet

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: