Bộ chuyển đổi tín hiệu RS-232 sang RS-485/422 Maiwe MWE485-TD

Thương hiệu: Maiwe | Tình trạng: Còn hàng

Liên hệ

RS232 to RS485/RS422 Isolated Serial Converter

THÔNG TIN SẢN PHẨM

The MWE485-TD is a high-speed isolation RS232 to RS485/422 interface converter. It can achieve bidirectional data conversion between serial ports, and the converter can automatically detect the baud rate of the serial port and be convenient to use, the data flow will not loss even if the baud rate of the device changes. It uses I/O circuit to automatically control the direction of data flow, no need the handshake signal settings, ensuring compliance with existing communication software and interface hardware. It supports hot plug and can operate stably even in temperature environments ranging from -40 ℃ to +85 ℃. It can be widely used in indoor and outdoor serial field-bus systems.

Tính năng

RS-485 two-wire half-duplex communication, RS-422 four-wire full duplex;
Equipped with integrated industrial wiring terminal, standard DB9-hole serial port;
Unique serial port protection circuit, which can be hot-swappable when power is on;
Built-in intelligent module, automatic identification of RS-485 signal flow direction, without CTS flow control;
Signal line 600W/ms anti-lightning protection and 15KV anti-static protection;
Transparent transmission, self-adapting baud rate, no need to change user protocol;
2500V photoelectric isolation, external power supply DC+5V or DC9～30V;
Industrial-grade design.

Thông số kỹ thuật

Interface
Serial Port	Standard: Compliant with EIA RS232, RS485 and RS422 standards Number of port: 1 RS232 and a RS485/422 RS232 signal: TX, RX, GND RS485/422 signal: A+/T+, B-/T-, GND, R+, R- Baud rate: 300bps~115200bps Communication distance: RS232: 5m. RS485/42:1.2km(19200bps) Load capacity: RS485/422 support 128 nodes polling Direction control: RS485 data flow direction auto control Connection method: RS232: DB9F RS485/422: 5.08mm pitch 10-pin terminal block Port protection: 15kV static protection and 600W/ms lightning protection Optical isolation: 2.5kV
Status LED	Power LED, data sending LED, data receiving LED
Power Supply
Power Input	DC5V or DC9~30V
Working Current	<15mA
Connection	5.08mm pitch 10-pin terminal block,3 pins for power
Physical Characteristics
Dimension	103×72×34 mm(DIN rail mounting clip excluded)
Installation	Easy installation on 35mm DIN rails
Weight	About 82g
Working Environment
Operating Temp	-40℃~+85℃
Storage Temp	-40℃~+85℃
Relative Humidity	5%~95% (non-condensing)

Thông tin đặt hàng

Standard Model	RS232	RS485/422	Power Voltage
MWE485-TD	1	1	DC5V or DC9~30V

Tài liệu

Datasheet

Bộ chuyển đổi tín hiệu RS-232 sang RS-485/422 Maiwe MWE485-TD

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng