Switch công nghiệp 4 cổng Ethernet + 2 cổng Quang (Dual Fiber, Multi Mode, ST, 2KM) ICP DAS NS-206AFT-T CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

4-port 10/100 Mbps Ethernet with 2 fiber ports Switch (Multi mode, ST connector)

THÔNG TIN SẢN PHẨM

Switch công nghiệp 4 cổng Ethernet + 2 cổng Quang (Dual Fiber, Single Mode, SC, 15KM) ICP DAS NSM-206FCS CR

Feature

Provides 2 x 100-FX fiber ports plus 4 x Ethernet ports
Each port supports both 10/100 Mbps speed auto negotiation
Full duplex IEEE 802.3x and half duplex backpressure flow control
Automatic MDI/MDI-X crossover for plug-and-play
Store-and-forward architecture
Redundant dual +12 ~ 48 VDC power inputs
Multi-mode, ST Connector Fiber supports
Broadcast Storm protection

Introduction

The NS-206AFT-T is a 4-port unmanaged Ethernet with 2 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 2 km) transmissions. The NS-206AFT-T provides a wide 12 to 48 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.

Application

Specifications

EMS Protection
ESD (IEC 61000-4-2)	± 4 kV Contact

LED Indicators
Status	PWR1, PWR2, PWR_Fault, Link/Act, 10/100M

Ethernet
Ports	4 x RJ-45, 10/100Base-TX
Standards	IEEE 802.3, 802.3u, 802.3x
Processing Type	Store & forward
MAC Table	2048
Frame Buffer Memory	1 Mbit
Flow Control	IEEE 802.3x flow control, back pressure flow control
Isolation	1500 Vrms 1 minute

Fiber
Ports	2 x 100 Base-FX, ST connector
Mode	Multi-Mode
Fiber Cable	50/125, 62.5/125 or 100/140 μm
Distance	2 km, (62.5/125 μm recommended) for full duplex
Wavelength	1300 or 1310nm
TX Output	-20 dBm Min. -14 dBm Max.
RX Sensitivity	-32 dBm
RX Overload	-8 dBm
Budget	12 dBm

Power
Reverse Polarity Protection	Yes
Input Range	+12 ~ +48 VDC (Redundant input)
Redundant Power Inputs	Yes
Consumption	0.14 A @ 24 VDC
Alarm Output	Yes,Relay 2 A @ 30 VDC

Mechanical
Casing	Plastic
Dimensions (mm)	31 x 157 x 123 (W x L x H)
Installation	DIN-Rail Mounting

Environment
Operating Temperature	-30 °C ~ +75 °C
Storage Temperature	-40 °C ~ +85 °C
Humidity	10% ~ 90% RH, non-condensing

Download

Datasheet

Documents

Ordering Information

NS-206AFT-T CR

Multi-mode, ST Connector, 4-port 10/100 Mbps with 2 Fiber ports Switch (RoHS)

Switch công nghiệp 4 cổng Ethernet + 2 cổng Quang (Dual Fiber, Multi Mode, ST, 2KM) ICP DAS NS-206AFT-T CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng