Bộ chuyển đổi quang điện công nghiệp 1 cổng Gigabit Ethernet sang Gigabit Quang (Dual fiber, Multi Mode 850nm, SC, 550M) ICP DAS NSM-200SX CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

1000Base-T to 1000Base-SX Fiber Media Converter (Multi mode 850nm, SC connector)

Gọi +84 904251826 để được trợ giúp

Bộ chuyển đổi quang điện công nghiệp 1 cổng Gigabit Ethernet sang Gigabit Quang (Dual fiber, Multi Mode 850nm, SC, 550M) ICP DAS NSM-200SX CR

Feature

• Provides 1 x 1000 Mbps fiber port with SC type connector for 1000 Base-SX device
• Supports wide operating temperatures from -30 °C ~ +75 °C
• Transparent to jumbo packets up to 10 KB
• Provides Link Fault Pass-through (LFP)
• Supports redundant +12 VDC ~ +48 VDC power input

Introduction

ICP DAS's line of feature rich 10/100/1000 Fiber Media Converters transparently connects copper to multimode or single mode fiber. Our 10/100/1000 Ethernet to Fiber Converters provide an economical path to extend the distance of an existing network, the line of non-fiber based equipment, or the distance between two devices. Gigabit Media Converters are also available with support for LFP (Link Fault Pass-through) feature.

Application

Specifications

LED Indicators
Status PWR1, PWR2, P-Fail, Link/Act, 100M, 1000M
Ethernet
Ports 1 x RJ-45, 10/100/1000Base-T(X)
Standards IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-TX; IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow Control
Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network
activity
Processing Type Store & forward, wire speed switching
MAC Table 8K
Memory Bandwidth 10 Gbps
Frame Buffer Memory 1 Mbit
Jumbo Frames 10K
DIP Switch 1 x LFP Enable
Fiber
Ports 1 x 1000Base-FX, SC connector
Mode Multi-Mode
Fiber Cable 50/125 μm
Distance 0.55 km
Wavelength 850 nm
TX Output -9.5 dBm Min.
-4 dBm Max.
RX Sensitivity -17 dBm
RX Overload -3 dBm
Power
Reverse Polarity Protection Yes
Input Range +12 VDC ~ +48 VDC Redundant dual Input(Non-isolated)
Redundant Power Inputs Yes
Consumption 0.1 A @ 24 VDC
Alarm Output Yes,Relay 1 A @ 30 VDC
Mechanical
Casing Metal
Dimensions (mm) DIN-rail mounting: 33 x 120 x 109 (W x L x H)
Wall mounting: 33 x 159 x 103 (W x L x H)
Installation DIN-rail mounting or wall mounting (optional)
Environment
Operating Temperature -30 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing

Download

Datasheet

Documents

Ordering Information

NSM-200SX     CR  Industrial 1000 Base-T to 1000 Base-SX Fiber Converter, Multi-mode 850 nm, 0.55 km, SC connector (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: