Card ISA 16 kênh đầu vào số DI + 16 kênh đầu ra Relay ICP DAS P16R16DIO CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

ISA Bus, 16-ch Isolated DI & 16 Relay Output Board

THÔNG TIN SẢN PHẨM

Features

Relay output Channel
Optically isolated digital input channels
AC/DC signal input ; AC signal input with filter
Connector pin assignment is compatible to 725 series
Power Requirements : 200 mA @ +5 V (max.) ; 260 mA @ +12 V (max.)
LED indicator for each relay output state

Introduction

The P16R16 DIO is a 16 isolated digital input and 16 relay output interface board designed for control and sensing applications. This interface board is easily installed in any PC/AT/XT.The P8R8 DIO Provides 16 electromechanical relay outputs and 16 optically isolated inputs. The P16R16 DIO has two 37-pin D-Sub Connector and the function is equal to two P8R8DIO.

Specification

Hardware
Connector	Female DB37 x 1

Digital Input
Channels	16
Type	Photocoupler (Sink and Source)
Response Speed	Without Filter: 45 kHz (Typical) With Filter: 0.05 kHz(Typical)
Trigger Mode	Static Update
Wet Contact, ON Voltage Level	AC/DC 5 ~ 24 V (AC 50 ~ 1 kHz)
Wet Contact, OFF Voltage Level	AC/DC 0 ~ 1 V
Isolation	5000 Vrms

Relay Output
Channels	16
Type	8 SPDT, 8 SPST
Contact Rating	AC/DC:120 V@0.3 A DC: 30 V@1 A
Operate Time	5 ms (Typical)
Release Time	5 ms (Typical)
Electrical Endurance	100,000 ops.
Mechanical Endurance	100,000 ops.

PC Bus
Type	ISA
Data Bus	8-bit

Power
Consumption	200 mA @ +5 V 260 mA @ +12 V

Mechanical
Dimensions (mm)	121 x 175 x 22 (W x L x D)

Environmental
Operating Temperature	0 ~ +60°C
Storage Temperature	-20 ~ +70°C
Humidity	5 ~ 85% RH, Non-condensing

Download

Data sheet

D ocuments

Odering information

P16R16DIO CR

ISA Bus, 16-ch Isolated D/I and Relay Output (RoHS)
Includes one CA-4037B cable and two CA-4002 D-Sub connectors

Card ISA 16 kênh đầu vào số DI + 16 kênh đầu ra Relay ICP DAS P16R16DIO CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng