Module PoE Ethernet Modbus TCP 2 kênh đầu vào biến dạng (Strain Gauge, Load Cell)+2 kênh DI + 2 kênh DO ICP DAS PET-7016 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

PoE Ethernet I/O Module with 2-ch Strain Gauge Input, 2-ch DI and 2-ch DO

Gọi +84 904251826 để được trợ giúp

Module PoE Ethernet Modbus TCP 2 kênh đầu vào biến dạng (Strain Gauge, Load Cell)+2 kênh DI + 2 kênh DO ICP DAS PET-7016 CR

Features

  • Built-in Web Server
  • Web HMI
  • Support for both Modbus TCP and Modbus UDP Protocols
  • Communication Security
  • Dual Watchdog
  • Wide Operating Temperature Range: -25 ~ +75°C
  • I/O Pair Connection
  • Built-in I/O
    • Strain Gauge Input: 2 Channels
    • DI/Counter: 2 Channels
    • DO: 2 Channels

Introduction

The PET-7016 is a strain gauge module with 2 analog input channels, 1 excitation voltage output channel, 2 digital input channels and 2 digital output channels module. It provides various programmable analog input inputs (+/-1 mV, +/-50 mV, +/-100 mV, +/-500 mV, +/-1 V, and +/-2.5 V) and supports full-bridge, half-bridge, and quarter-bridge. The range for each analog input is allowed to be configured individually. Excitation voltage output can be in the range of 0 ~ 10 V with a 60 mA driving efficiency. Digital outputs can also be set as alarm outputs. The PET-7016 can also provide long-distance strain gauge measurement that compensates for the loss of voltage resulting from long-distance measurements.

Specification

CPU Module
Watchdog Timer Yes, Module (0.8 second), Communication (Programmable)

 

EMS Protection
EFT (IEC 61000-4-4) ±4 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
±8 kV Air for Random Point

 

LED Indicators
Status 1 x Power, 2 x Ethernet, 1 x PoE

 

Software
Built-in Web Server Yes

 

Digital Input/Counter
Channels 2
Sink/Source (NPN/PNP) Sink/Source
Contact Wet Contact
ON Voltage Level +3.5 VDC ~ +50 VDC
OFF Voltage Level +1 VDC Max.
Max. Counts 4,294,967,285 (32 bits)
Frequency 100 Hz
Min. Pulse Width 5 ms
Overvoltage Protection +70 VDC

 

Digital Output
Channels 2
Type Isolated Open Collector
Sink/Source (NPN/PNP) Sink
Load Voltage +5 VDC ~ +50 VDC
Max. Load Current 700 mA/Channel
Overvoltage Protection 60 VDC
Overload Protection 1.4 A
Short-Circuit Protection Yes
Power on Value Yes, Programmable
Safe Value Yes, Programmable

 

Strain Gauge Input
Accuracy ±0.05%
Channels 2 (Differential)
Individual Channel Configuration Yes
Overvoltage Protection 30 VDC
Resolution 16-bit
Sampling Rate 10 Samples/Second (Total)
Sensor Type ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V
±20mA, 10 ~ 20 mA, 4 ~ 20 mA

 

Excitation Voltage Output
Channels 1
Range 0 ~ 10 V
Accuracy ±0.05% of FSR
Max. Load Current 60 mA
Drift ±50 ppm/°C
Power on Value Yes

 

Ethernet
Ports 10/100 Base-TX with Auto MDI/MDI-X
PoE Yes
Security ID, Password and IP Filter
Protocol Modbus TCP, Modbus UDP

 

Power
Reverse Polarity Protection Yes
Consumption 3.2 W
Powered from PoE Yes, IEEE 802.3af, Class1
Powered from Terminal Block 12 ~ 48 VDC

 

Mechanical
Dimensions (mm) 72 mm x 123 mm x 35 mm (W x L x H)
Installation DIN-Rail or Wall mounting

 

Environmental
Operating Temperature -25 ~ +75°C
Storage Temperature -30 ~ +80°C
Humidity 10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

PET-7016     CR  PoE Ethernet I/O Module with 2-ch Strain Gauge Inputs, 2-ch DI and 2-ch DO (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: