Card PCI 32 kênh đầu vào số DI + 32 kênh đầu ra số DO ICP DAS PISO-730U CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

Universal PCI, 32-ch Isolated Digital I/O and 32-ch TTL Digital I/O Board (Current Sinking, NPN)

Gọi +84 904251826 để được trợ giúp

Card PCI 32 kênh đầu vào số DI + 32 kênh đầu ra số DO ICP DAS PISO-730U CR

Features

  • Support the +3.3/+5 V PCI bus
  • 16-channel Optically-isolated Digital Input
  • 16-channel Optically-isolated Digital Output (Sink, NPN)
  • 16-channel 5 V/TTL Digital Output
  • 16-channel 5 V/TTL Digital Input
  • 3750 Vrms photo-isolation protection
  • Built-in DC/DC converter with 3000 VDC isolated
  • Two interrupt sources
  • Card ID Function(SMD Switch)
  • Digital Output status readback
  • SMD, short card, power saving
  • Supports Plug & Play to obtain I/O resources
  • No more manually setting of I/O address and IRQ

Introduction

The PISO-730U universal PCI card supports 3.3 V/5 V PCI bus. PISO-730U cards provide 32 isolated digital I/O channels (16 x DI and 16 x DO) and 32 TTL-level digital I/O channels (16 x DI and 16 x DO). Both the isolated DI and DO channels use a short optical transmission path to transfer an electronic signal between the elements of a circuit and keep them electrically isolated. With 3750 Vrms isolation protection, these DIO channels allow the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltages. Each digital output offers a Darlington (NPN) transistor and integrated suppression diode for the inductive load. The open collector outputs (DO channels) are typically used for alarm and warning notification, signal output control, control for external circuits that require a higher voltage level, and signal transmission applications, etc.

PISO-730U cards also add a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more cards in one computer.

The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.

Accessories

Specification

Hardware
Card ID Yes (4-bit)
Connector Female DB37 x 1
20-pin box header x 2

 

Digital Input
Channels 16 (Isolated) + 16 (Non-isolated )
Type Isolated: Photocoupler (Sink and Source)
Non-isolated: 5V/TTL
TTL Input, ON Voltage Level 2.0 V Min.
TTL Input, OFF Voltage Level 0.8 V Max.
Response Speed 4 kHz (Typical) (Isolated)
1.0 MHz (Typical) (Non-isolate)
Trigger Mode Static Update
Wet Contact, ON Voltage Level 9 ~ 24 V (Min. 7 V; Max. 30 V)
Wet Contact, OFF Voltage Level 0 ~ 1 V
Isolation 3750 Vrms (Isolated)

 

Digital Output
Channels 16 (Isolated) + 16 (Non-isolated )
Type Isolated: Sink (NPN), Open Collector
Non-isolated: 5V/TTL
Operation Mode Static Update
Voltage Non-isolated:
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Max. Load Current +30 V for each channel @ 100% duty (Isolated)
Sink: 2.4 mA @ 0.8 V (Non-isolated)
Source: 0.8 mA @ 2.0 V (Non-isolated)
Response Speed 4 kHz (Typical) (Isolated)
1.0 MHz (Typical) (Non-isolate)
Isolation 3750 Vrms (Isolated)

 

PC Bus
Type 3.3 V/5 V Universal PCI, 32-bit, 33 MHz
Data Bus 8-bit

 

Power
Consumption 600 mA @ +5 V

 

Mechanical
Dimensions (mm) 105 x 180 x 22 (W x L x D)

 

Environmental
Operating Temperature 0 ~ +60°C
Storage Temperature -20 ~ +70°C
Humidity 5 ~ 85% RH, Non-condensing

Download

Data sheet

Documents

Odering information

PISO-730U     CR  Universal PCI, 32-ch Isolated Digital I/O and 32-ch Digital I/O Board (Current Sinking, NPN) (RoHS)
Includes one CA-4002 D-Sub connector

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: