Card PCI 1 cổng DeviceNet Master ICP DAS PISO-DNM100U-T CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

1 Port Intelligent DeviceNet Master Universal PCI Board

Gọi +84 904251826 để được trợ giúp

Card PCI 1 cổng DeviceNet Master ICP DAS PISO-DNM100U-T CR

Features

  • Programmable Master MAC ID
  • Programmable transfer-rate 125 kbps, 250 kbps, 500 kbps
  • Each port support maximum nodes up to 64
  • Support UCMM and Group 2 Only Server functions
  • The maximum Fragment number is (Input/Output) up to 64
  • Support I/O Operation Mode: Poll, Bit-Strobe and Change Of State/Cyclic
  • Support Auto-Scan slave device function
  • Support on-line adding and removing devices
  • Support boot-up auto communicating with slave devices
  • Support Auto-Reconnect when the connection is broken

Introduction

PISO-DNM100U can represent an economic solution of DeviceNet application and be a DeviceNet master device on the DeviceNet network. It is a "Predefined Master-Slave connection Set". PISO-DNM100 supports Group 2 only Server and UCMM functions to communication with slave devices. It has an independent CAN bus communication port and has the ability to cover a wide range of DeviceNet applications.

Besides, PISO-DNM100U uses the CAN controller Phillips SJA1000T and transceiver 82C250, which provide bus arbitration, error detection with auto correction and re-transmission function.It can be installed on almost any windows-based system, for example Windows system. It is popularly applied in the industrial automation, building automation, vehicle, marine, and embedded control network. In order to expand the DeviceNet functions of ICPDAS products, PISO-DNM100U is developed for this purpose.

Specification

Software
Driver Windows XP/7/8/10 (32-bit/64-bit OS)
Library VB 6.0, VC++ 6.0, BCB 6.0, Visual Studio .NET

 

LED Indicators
Status Green LED, Red LED

 

PC Bus
Type Universal PCI supports both 5 V and 3.3 V PCI bus
Board No. By DIP switch

 

DeviceNet
Controller NXP SJA1000T with 16 MHz clock
Microprocessor inside with 80186 80MHz
Transceiver NXP 82C250
Ports 1
Baud Rate 125 k, 250 k, 500 k
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Jumper for 120 Ω terminal resistor
Porotocol DeviceNet Volumn I ver2.0, Volumn II ver2.0
CAN Specification ISO-11898-2, CAN 2.0A and CAN 2.0B

 

Power
Consumption 300 mA @ 5 V

 

Mechanical
Dimensions (mm) 138 x 22 x 105 (W x L x H)

 

Environmental
Operating Temperature 0 ~ +60 ℃
Storage Temperature -20 ~ +70 ℃
Humidity 5 ~ 85% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

PISO-DNM100U-T     CR  1 Port Intelligent DeviceNet Master Universal PCI Board (5-pin Screw Terminal Connector) (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: