PISO-ENCODER300 PCI Bus 3 Axis Encoder Input Board

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ
PCI Bus 3 Axis Encoder Input Board. Includes CA-SC68, SCSI-II 68-pin Male Connector (Solder Type)
Gọi +84 904251826 để được trợ giúp

PISO-ENCODER300 PCI Bus 3 Axis Encoder Input Board



PISO-ENCODER/300/600 has a 3-axis or 6-axis encoder counter. Each axis has a 32-bit, true counter with maximum counting rate of 1MHz. The Index reset resets by using a C+/C- channel, which will reset every revolution. The hardware reset resets by an external pin (HR1 ~ HR6). The HR1 ~ HR6 also can be a digital input. 8-channel digital outputs are also provided. 2500Vrms photo couplers isolate the digital I/O. This board provides DOS, windows 95 and windows NT drivers.

The counting mode has 3 types of selections:

  1. QUADRANT mode,
  2. CW_CCW mode
  3. PULSE_DIR mode.

3 kinds of counter reset modes are provided:

  1. Register Reset
  2. Index Reset
  3. Hardware Reset.
  • PCI bus
  • 3-axis Encoder counter
  • True 32 bits counter
  • Maximum counting rate: 1MHz.
  • Third-order internal digital filter.
  • Counting mode: Quadrant, CW_CCW, PULSE_DIR
  • A+, A-, B+, B-, C+, C- inputs.
  • Programmable reset counter function.
  • Index (C channel) reset counter function.
  • Hardware reset (HR1 ~ HR6), reset counter function
  • SCSI-II 68-pin connector.
  • Toolkit for DOS
  • Toolkit for Windows 95/98
  • Toolkit for Windows NT
  • Toolkit for Windows 2000/XP
  • Toolkit for LabVIEW 95/98
  • Toolkit for LabVIEW NT
  • Toolkit for LabVIEW 2000/XP
  • Toolkit for OCX 95/98
  • Toolkit for OCX NT
  • Toolkit for OCX 2000/XP
  • Driver for LINUX

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: