Card PCI 32 kênh đầu vào số DI + 32 kênh đầu ra số DO ICP DAS PISO-P32A32U CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

Universal PCI, 32-ch Optical Isolated DI and 32-ch Open Collector Isolated (Source, PNP) DO Board

Gọi +84 904251826 để được trợ giúp

Card PCI 32 kênh đầu vào số DI + 32 kênh đầu ra số DO ICP DAS PISO-P32A32U CR

Features

  • Support the +3.3/+5 V PCI bus
  • 32 Optically-isolated Digital Input Channels
  • 32 Optically-isolated Digital Output Channels(Source, PNP)
  • Built-in DC/DC converter with 3000 VDC isolation
  • Card ID function (SMD Switch)
  • Four isolated banks
  • 3750 Vrms photo-isolation protection
  • Digital Output status readback

Introduction

The PISO-P32A32U universal PCI card supports 3.3 V/5 V PCI bus. These cards provide 32 optically-isolated Digital Input channels and 32 optically-isolated Digital Output channels, arranged into four isolated banks. Each Digital Output channel includes a PNP transistor and an integral suppression diode for the inductive load. Isolated input channels 0-15 are allocated to Group A, while channels 16-31 are allocated to Group B. Isolated output channels are allocated to Groups C and D. The photocoupler input for the PISO-P32A32U can be powered by either an internal current source or an external power supply, while the input for the PISO-P32A32U operates using an external power supply only.

This interface board is easily installed in any PC. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. The PISO-P32A32U has one 37-pin D-Sub connector and one 40-pin male header. The 40-pin to DB-37 flat-cable is used to fix with the case. The user can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 16 input channels and 16 output channels.

The PISO-P32A32U also include an onboard Card ID switch that enables the board to be recognized via software if two or more boards in the same computer.

The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.

Accessories

Specification

Hardware
Card ID Yes (4-bit) for Version 4.0 or above
Connector Female DB37 x 1
40-pin box header x 1

 

Digital Input
Channels 32
Type Photocoupler (Sink and Source)
Response Speed 4 kHz (Typical)
Trigger Mode Static Update
Wet Contact, ON Voltage Level 9 ~ 24 V (Min. 7 V; Max. 30 V)
Wet Contact, OFF Voltage Level 0 ~ 1 V
Dry Contact, ON Voltage Level Close to GND
Dry Contact, OFF Voltage Level Open
Isolation 3750 Vrms (Using external power)

 

Digital Output
Channels 32
Type Source(PNP), Open Emitter
Operation Mode Static Update
Max. Load Current 100 mA/+30 V for each channel @ 100% duty
Response Speed 4 kHz (Typical)
Isolation 3750 Vrms

 

PC Bus
Type 3.3 V/5 V Universal PCI, 32-bit, 33 MHz
Data Bus 8-bit

 

Power
Consumption 600 mA @ +5 V

 

Mechanical
Dimensions (mm) 105 x 180 x 22 (W x L x D)

 

Environmental
Operating Temperature 0 ~ +60°C
Storage Temperature -20 ~ +70°C
Humidity 5 ~ 85% RH, Non-condensing

Download

Data sheet

Documents

Odering information

PISO-P32A32U     CR  Universal PCI, 32-ch Optical Isolated Digital Input and 32-ch Open Collector Isolated Digital Output Board (Current Source, PNP) (RoHS) Includes one CA-4037B cable and two CA-4002 D-Sub connectors

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: