PISO-P8R8U CR: Card PCI 8 kênh đầu vào số DI + 8 kênh đầu ra Relay

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

ISO-P8R8U CR Universal PCI, 8-ch Optically Isolated Digital Input and 8 Relay Output Board (RoHS) Includes one CA-4002 D-Sub connector

Gọi +84 904251826 để được trợ giúp

PISO-P8R8U CR: Card PCI 8 kênh đầu vào số DI + 8 kênh đầu ra Relay

Features

  • Support the +3.3 V/+5 V PCI bus
  • Card ID Function(SMD Switch)
  • 8 channels relay output
  • 8 channels optically isolated digital input
  • Selectable DC signal input filter
  • AC Signal input with filter
  • 3750 Vrms photo-isolation protection

Introduction

The PISO-P8R8U universal PCI card supports 3.3 V/5 V PCI bus. These cards provide 8-channel optically isolated DI and an 8-channel electromechanical relay output board. These DI channels provide 3750 Vrms isolation protection that allows the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltages. Relays are used where necessary to control a circuit using a low-power signal (with complete electrical isolation between the control and controlled circuits), or where several circuits must be controlled using one signal. The PISO-P8R8U can be used in varous applications, such as controlling the ON/OFF state of external devices, driving external relays or small power switches, activating alarms, contact closure, sensing external voltages or switches, etc. These cards contain a single DB-37 connector for easy wiring.

The PISO-P8R8U also adds a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more PIO-P8R8U cards in one computer.

The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.

Accessories

Specification

Hardware
Card ID Yes (4-bit)
Connector Female DB37 x 1

 

Digital Input
Channels 8
Type Photocoupler (Sink and Source)
Response Speed Without Filter: 50 kHz (Typical)
With Filter: 0.455 kHz(Typical)
Trigger Mode Static Update
Wet Contact, ON Voltage Level AC/DC 5 ~ 24 V (AC 50 ~ 1 kHz)
Wet Contact, OFF Voltage Level AC/DC 0 ~ 1 V
Isolation 5000 Vrms

 

Relay Output
Channels 8
Type SPST N.O.(Form A)
Contact Rating AC: 250 V @ 1.6 A
DC: 30 V @ 5 A
Operate Time 6 ms (Typical)
Release Time 3 ms (Typical)
Electrical Endurance 100,000 ops.
Mechanical Endurance 2,000,000 ops.

 

PC Bus
Type 3.3 V/5 V Universal PCI, 32-bit, 33 MHz
Data Bus 8-bit

 

Power
Consumption 300 mA @ +5 V

 

Mechanical
Dimensions (mm) 105 x 149 x 22 (W x L x D)

 

Environmental
Operating Temperature 0 ~ +60°C
Storage Temperature -20 ~ +70°C
Humidity 5 ~ 85% RH, Non-condensing

Download

Data sheet

Documents

Odering information

ISO-P8R8U     CR  Universal PCI, 8-ch Optically Isolated Digital Input and 8 Relay Output Board (RoHS)
Includes one CA-4002 D-Sub connector

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: