Card PCI High-speed 8-axis Motion Control Card with FRnet Master ICP DAS PISO-PS810 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

Universal PCI Bus, High-speed 4-axis Motion Control Card with FRnet Master

THÔNG TIN SẢN PHẨM

Features

• Independent 8-axis motion control
• Support for hand wheel and jog functions
• 4-step home modes with auto-searching
• 2/3-axis linear interpolation function
• 2-axis circular interpolation function
• Programmable T/S-curve acceleration and deceleration
• Programmable ring counter
• Alarm reset and error counter clear output (ERC)
• High-speed auto-incremental and auto-reloadable compare output (CMP)
• Expandable remote I/O: 128 DI and 128 DO via a two-wire FRnet interface.

Introduction

The PISO-PS810 is a 8-axis stepping/pulse-type servo motor control card that can be used on any IPC with a 5 V or 3.3 V PCI bus, and is suitable for general-purpose motion applications. This card equipped with one FRnet Master which allows the fast remote I/O of the IPC to be expanded easily. The two-wired FRnet interface allows a maximum 128 DI and 128 DO channels, which are automatically scanned within a period of 0.72 ms. In addition to its wide speed range, this intelligent motion controller also has a variety of motion control functions built in, such as 2/3-axis linear interpolation, 2-axis circular interpolation, T/S-curve acceleration/ deceleration, numerous synchronous actions, automatic homing, and others. A major advantage is that the majority of the PISO-PS810 motion control functions are performed by the high-performance motion ASIC with little load on the processor. The motion status, FRnet I/O, and the other I/O cards on the IPC can still be monitored while driving the motors. As the low CPU loading requirements of the PISO-PS810 is minimal, one or more motion cards can be used with a single IPC. ICP DAS also provides a variety of functions and examples that can be used to reduce the need for additional programming, making it a highly cost-eff ective solution for motion control application developers.

Specification

Software
OS Support	Windows 7 32/64-bit Windows XP/2000 32-bit
Utility	EzGo Utility

Hardware
Connector	100-pin VHDCI

General
Synchronous Action	10 activation factors and 14 actions
Speed Profile	T/S-curve
Position Control Mode	Incremental mode and Absolute mode
Operation Mode	Semi-closed Loop
No. of Axes	8
Command Type	Pulse Command

Axis I/O
Servo Interface Output	SVON, ALM_RST, ERC
Mechanical Switch Input	Home, LMT+/-, NHOME, EMG
Position Compare Output	High-Speed 5 V TTL or 24 V open collector (4 of any 8 axes)
Servo Interface Input	INP, ALM

Encoder Input
Ring Counter Mode	32-bit
Mode	A/B pulse, Up/Down
Counting Rate	4 MHz (Max.)
Counter Width	32-bit

Pulse Output
Counter Width	32-bit
Mode	CW/CCW, PULSE/DIR
Rate	4 MHz (Max.)

Interpolation
Cicular	2 groups of 2 axes Interpolation
Linear	2 groups of 2 to 3 axes Interpolation

Digital Input
Channels	Local: 8 DI Expandable: 128 DI
Isolation	2500 Vrms optical isolation

Digital Output
Channels	Local: 8 DO Expandable: 128 DO
Isolation	2500 Vrms optical isolation

PC Bus
Type	Universal PCI Bus

Power
Consumption	+5 V @ 500 mA

Environmental
Operating Temperature	-20 ~ +75°C
Storage Temperature	-30 ~ +85°C
Humidity	5 ~ 85% RH, non-condensing

Download

Data sheet

D ocuments

Odering information

PISO-PS810

Universal PCI Bus, High-speed 8-axis Motion Control Card with FRnet Master

Card PCI High-speed 8-axis Motion Control Card with FRnet Master ICP DAS PISO-PS810 CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng