Module nguồn dự phòng 100W ICP DAS RPS-100 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

Industrial Redundant Power Supply 100W Power Module

THÔNG TIN SẢN PHẨM

Features

Max 100W output power
Support Load Balance
Supports hot swapping
Easy installation.

Introduction

The RPS-100 can return various real-time information of itself, including load current, temperature, existence, malfunction etc. The information not only can be used to evaluate the health condition of the RPS-100 itself, but also can be record to estimate the power consumption of the whole system, and an instant warning can be sent when abnormal power consumption occurs. Through the information, user can easily implement predictive alarm and fault alarm function for the system. In addition, the RPS-100 can also record the using time of itself by the communication module, which can be used as a basis for maintenance and replacement and estimate MTBF (Mean Time Between Failures). When the RPS-100 has reached the recommended service life, user can replace it early to make the power system more reliable and stable. The RPS-100 has a built-in load balancing function, so there is no need to add extra load balancing modules. In addition, the RPS-100 adopts a slot-type design, and it supplies hot swapping function, so when user replaces the RPS-100, there is no need to turn off the power system. In comparison to the traditional power supply, the RPS-100 saves the trouble of wiring, and it is simpler and safer.

Specification

Safety
Standard	Design to meet 62368

EMC
Standard	EN 61000-3-2 EN 61000-3-3 EN 61204-3 IEC 61000-4-2(ESD): ±4 kV for Contact IEC 61000-4-3 IEC 61000-4-4(EFT): ±2 kV for power line IEC 61000-4-5(Surge): ±2 kV for power line IEC 61000-4-6 IEC 61000-4-8 IEC 61000-4-11

LED Indicators
Status	2, PWR, DC_Fail

General
Hot Swap	Yes, for power modules
Load Balance	Yes

Input
Voltage Range	90 ~ 264 VAC
Frequency Range	47 ~ 63Hz
Ac Current (Typ.)	1.01A/115VAC, 0.51A/230VAC
Inrush Current (Typ.)	COLD START 30A/115VAC 60A/230VAC
Leakage Current	Earth<3.5mA , Touch<0.25mA

Output
Ripple & Noise (Max.)	50mVp-p
Voltage Adj. Range	23 ~ 25V
Voltage Tolerance	±1.0%
Line Regulation	±1.0%
Load Regulation	±3.0%
Setup, Rise Time	1300ms,120ms at full load
Hold Up Time (Typ.)	30ms at full load
DC Voltage	24V
Rated Power	100W
Rated Current	4.16A
Efficiency	86% typical

Protection
Over Voltage	110%~200% (Automatic recovery)
Overload	26.4~31.2 (Automatic recovery)

Mechanical
Casing	metal
Dimensions (mm)	46 x 133 x 148 (W x L x D)

Environmental
Operating Temperature	-20 ~ +50 °C
Storage Temperature	-40 ~ +85 °C
Humidity	10 ~ 95% RH, Non-condensing

Download

Datasheet

Documents

Ordering information

RPS-100 CR

Industrial Redundant Power Supply 100W Power Module. (RoHs)

Module nguồn dự phòng 100W ICP DAS RPS-100 CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng