Bộ đổi nguồn dự phòng 4 khe cắm ICP DAS RPS-4M/W2

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

4-slot Industrial Redundant Power Supply. Includes two RPS-100 modules

THÔNG TIN SẢN PHẨM

Features

Max 400W output power, each slot can insert a 100W power module
N+1 Redundant, maximum N=3
Power module supports hot swapping
Detect current load of module
Detect temperature of module
Easy installation.
Support Modbus RTU/TCP Protocol

Introduction

In response to the requirements of lots of digital DC power supplies in the industry, ICP DAS has developed the RPS series of redundant power supply, which not only adopts the N+1 parallel-connection and load-sharing technology to implement power redundancy, but also adds communication functions to enable that information of power supply can be monitored in real time. Through the communication functions, user can monitor the working status of the power supply of the whole factory in the monitoring center. When the power module is abnormal, it can be found and dealt with in real time. There is no need to send people to inspect and ensure that the power supply is safe. In particular, the equipment in some important industries such as finance, medical treatment and power plants needs stable power supplies to ensure that the equipment keeps working.
The RPS-4M/W2 has built-in Ethernet and RS-485 communication interfaces, which can not only monitor the operation status of the power modules in real time, but also instantly return various real-time information of the power modules, including load current, temperature, existence of the power module in the slots, malfunction of the power module, etc. The information not only can be used to evaluate the health condition of the power module itself, but also can be record to estimate the power consumption of the whole system, and an instant warning can be sent when abnormal power consumption occurs. Through the information, user can easily implement predictive alarm and fault alarm function for the system. In addition, the RPS-4M/W2 can also record the using time of each power module, which can be used as a basis for maintenance and replacement and estimate MTBF (Mean Time Between Failures). When the power module has reached the recommended service life, user can replace it early to make the power system more reliable and stable. The RPS-4M/W2 has a built-in load balancing function, so there is no need to add extra load balancing modules. In addition, the RPS-4M/W2 adopts a slot-type design, and it supplies hot swapping function, so when user replaces the power module, there is no need to turn off the power system. In comparison to the traditional power supply, the RPS-4M/W2 saves the trouble of wiring, and it is simpler and safer.

Specification

EMC
Standard	IEC 61000-4-2(ESD): ±4 kV for Contact IEC 61000-4-4(EFT): ±500 V for Signal

LED Indicators
Status	3, PWR, Rx, STA

COM Ports
Ports	1 x RS-485
Baud Rate	1200 ~ 115200 bps default: 9600 bps
Data Format	(N,8,1),(N,8,2),(E,8,1),(O,8,1) default:(N,8,1)
Protocol	Modbus RTU slave
Node Address	Hardware: 1 ~ 64 Software: 1~255

Ethernet
Ports	1 x RJ-45, 10/100Base-TX
Protocol	Modbus TCP server, Web server

General
Slot	4, for power modules

Self-diagnostic
Current Measurement	0A~5A; +/- 0.25A
Temperature Measurement	0℃~100℃; +/- 5℃
Alarm Output	1x Relay; Form A, 5A

Power
Input Range	90 ~ 264 VAC
Consumption	110 VAC, 45 mA, 4.95W

Mechanical
Casing	metal
Dimensions (mm)	133 x 266 x 177 (W x L x D)
Installation	DIN-Rail

Environmental
Operating Temperature	-20 ~ +50 °C
Storage Temperature	-40 ~ +85 °C
Humidity	10 ~ 95% RH, Non-condensing

Download

Datasheet

Documents

Ordering information

UP0061D-12PA58G CR

Wall mount power supply; Input range 90-240VAC; Output 12VDC/0.5A, 6 W; two pins USA plug (RoHS)

Bộ đổi nguồn dự phòng 4 khe cắm ICP DAS RPS-4M/W2

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng