Bộ đổi nguồn 220VAC sang 12VDC 66A Leyu S-800-12

Thương hiệu: Leyu | Tình trạng: Còn hàng

Liên hệ

Bộ đổi nguồn 220VAC sang 12VDC 66A

THÔNG TIN SẢN PHẨM

Features

High efficiency, high reliability, low cost
Universal AC input / full range
100% full load burn-in test
Protections: Short circuit/ Over load/ Over voltage
PWM control and regulated
Forced air cooling by built in DC fan
Built-in cooling Fan ON-OFF control
2 years warranty

SPECIFICATIONS
OUTPUT
MODEL	S-800-12	S-800-13.5	S-800-15	S-800-24	S-800-27	S-800-48
DC Voltage	12V	13.5V	15V	24V	27V	48V
Rated Current	66.5A	59.2A	53A	33A	29.6A	16.6A
Current Range	0-66.5A	0-59.2A	0-53A	0-33A	0-29.6A	0-16.6A
Rated Power	798W	799W	795W	792W	799W	796W
Ripple & Noise	240mVp-p	240mVp-p	240mVp-p	240mVp-p	200mVp-p	300mVp-p
Voltage Adj. Range	10-13.2V	12-15V	13.5-18V	20-26.4V	24-30V	41-56V
Voltage Tolerance	±2%	±2%	±1%	±1%	±1%	±1%
Setup,Rise,Hold Up Time	1.5s, 50ms, 20ms at full load
INPUT
Voltage Range	180~264VAC 47~63Hz
AC Current	3.5A/230V
Efficiency	84%	84%	83%	85%	86%	87%
Inrush Current	18A/115V 36A/230V
Leakage Current	< 3.5mA/240VAC
PROTECTION
Over Load	105%~135%
Over Load	Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage	13.8-16.2V	15.5-18.2V	18-21V	27.6-32.4V	31-36.5V	57.6-67.2V
Over Temp	≥55℃Fan On ≤45℃Fan Off ≥70℃ Output Cutout
ENVIRONMENT
Working Temp., Humidity	-10℃~+50℃; 20%~90%RH
Storage Temp., Humidity	-20℃~+85℃; 10%~95%RH
Vibration	10~500Hz, 2G 10min,/11cycle, 60min, each axes
SAFETY
Withstand Voltage	I/P-O/P:3KVAC I/P-FG:1.5KVAC I/P-FG:0.5KVAC
Isolation Resistance	I/P-O/P,I/P-FG,I/P-FG:500VDC/100MΩ
STANDARD
Safety Standard	UL1950
EMC Standard	CISPR22(EN 55022),IEC1000-4,2,3,4,5,6,8,11 IEC1000-3-2
OTHERS
Dimension	24112466mm (LWH)
Weight	1.3Kg
NOTE
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Bộ đổi nguồn 220VAC sang 12VDC 66A Leyu S-800-12

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng