STEP-200 CR: Card ISA 2 trục điều khiển động cơ bước (Stepper Motor Control)

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

STEP-200 ISA Bus, 2-axis High-speed Stepper Motor Control Card (Limited Functions and Economical) Includes: Include: CA-PC25M (25-pin Male D-Sub Connector with Plastic Cover)

Gọi +84 904251826 để được trợ giúp

STEP-200 CR: Card ISA 2 trục điều khiển động cơ bước (Stepper Motor Control)

Features

• 2-axis independent, simultaneous stepper motor control/servo motor control (Pulse input type)
• Drivers for DOS, Windows 95/98/ME, Windows NT
• Embedded Microprocessor
• Command Type Interface
• Linear and circular interpolation
• Acceleration/deceleration: Automatic trapezoidal acceleration/deceleration
• Output polarity can be programmable
• 5 optical isolated digital inputs per axis for limit switches

Introduction

The STEP-200 is a 2-axis, command-based stepper motor controller board for IBM PC/XT/AT bus-compatible devices. The board can also be used for pulse-type servo motor control (pulse input type). The board includes a build-in μP that performs a variety of motion control commands and shares the loading of the host computer. A 2 KB FIFO is included as a command buffer, which provides a buffer time of 1360 ms. The hardware architecture of STEP-200 is ideal for the Windows operating system, and drivers for DOS and Windows are provided offering real-time motion control solutions for Windows systems.

Specification

Software
OS Support Windows 95/98/ME/NT4.0
Library DOS 6.2

 

Hardware
Connector 25-pin D-Sub

 

General
Speed Profile T-curve
Position Control Mode Incremental mode and absolute mode
Operation Mode Open loop
No. of Axes 2
Command Type Pulse command

 

Axis I/O
Servo Interface Output SVON
Mechanical Switch Input Home, forward, backward limit, EMG
Position Compare Output 10 KHz

 

Encoder Input
Ring Counter Mode 32-bit

 

Pulse Output
Counter Width 32-bit
Mode CW/CCW, PULSE/DIR
Rate 250 KHz (Max.)

 

Digital Input
Isolation 2500 Vrms optical isolation

 

Digital Output
Isolation 2500 Vrms optical isolation

 

PC Bus
Type ISA bus

 

Power
Consumption +5 V @ 500 mA

 

Environmental
Operating Temperature 0 ~ +50°C
Storage Temperature -20 ~ +70°C
Humidity 5 ~ 85% RH, non-condensing

Download

Data sheet

Documents

Odering information

STEP-200  ISA Bus, 2-axis High-speed Stepper Motor Control Card (Limited Functions and Economical)
Includes: Include: CA-PC25M (25-pin Male D-Sub Connector with Plastic Cover)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: