Tổng tiền thanh toán:
Sản phẩm đã được thêm vào giỏ hàng
WISE-7105 CR Intelligent I/O Module with 8-ch Thermistor Input, 4-ch DO and PoE (RoHS)
WISE-7105 CR: Bộ lập trình nhúng IoT Wise 3 kênh nhiệt độ (Thermistor) + 4 kênh DO
• Runs on browsers, no extra software tool is required.
• No more programming, Web pages provided for control logic editing.
• IF-THEN-ELSE logic rules execution ability.
• Built-in I/O (AI: 8-channels Thermistor Input; DO: 4-channels).
• Support I/O channel monitoring/control, Timer.
• Support non-SSL Email sending and CGI Command sending operations.
• Modbus TCP Protocol for SCADA System Integration.
• IEEE 802.3af-compliant Power over Ethernet (PoE).
WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development. WISE-7105 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7105 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc. This multi-function module WISE-7105 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 16-bit, 8-channel Thermistor inputs and 4-channel digital outputs. Each analog channel is allowed to configure an individual range.
|Protocol||• Modbus TCP
• CGI Command (Sending)
|Function||•Web Interface for Configuration
•IF-THEN-ELSE Logic operation (36 rules supported)
•I/O channel monitoring and control
•Timer operation (12 set supported)
•Internal Register operation (48 set supported)
•Recipe operation (12 set supported)
•Advanced P2P (8 set supported)
•non-SSL Email sending function
|CPU||16-bit CPU (80 MHz)|
|Intra-module Isolation||2500 VDC|
|EFT (IEC 61000-4-4)||±4 kV for Power Line|
|ESD (IEC 61000-4-2)||±4 kV Contact for each terminal and ±8 kV Air for random point|
|Status||1 x PoE Power
1 x System Running
1 x Ethernet Link/Act
1 x Ethernet 10/100M Speed
|Type||Thermistor (Precon ST-A3, Fenwell U, YSI L100, YSI L300,YSI L1000, YSI B2252, YSI B3000, YSI B5000,YSI B6000, YSI B10000, YSI H10000,YSI H30000)|
|Accuracy||±0.1% or better|
|Sampling Rate||10 Sample/Sec. (Total)|
|Common Mode Rejection||86 dB|
|Normal Mode Rejection||100 dB|
|Overvoltage Protection||110 VDC /VAC|
|Individual Channel Configuration||Yes|
|Open Wire Detection||Yes|
|Zero Drift||±20 μV/°C|
|Span Drift||±25 ppm/°C|
|Type||Isolated Open Collector|
|Load Voltage||+5 VDC ~ +50 VDC|
|Max. Load Current||700 mA/Channel|
|Overvoltage Protection||60 VDC|
|Overload Protection||1.4 A|
|Ports||RJ-45 x 1, 10/100 Base-TX and automatic MDI/MDI-X|
|Reverse Polarity Protection||Yes|
|Input Range||12 ~ 48 VDC|
|Powered from PoE||Yes, IEEE 802.3af, Class 1|
|Powered from Terminal Block||Yes, 12 ~ 48 VDC|
|Dimensions (mm)||72 x 123 x 35 (W x L x H)|
|Installation||DIN-Rail Mounting/Wall Mounting|
|Operating Temperature||-25 ~ +75 °C|
|Storage Temperature||-30 ~ +80 °C|
|Humidity||10 ~ 90% RH, Non-condensing|
|WISE-7105 CR||Intelligent I/O Module with 8-ch Thermistor Input, 4-ch DO and PoE (RoHS)|