Tổng tiền thanh toán:
Sản phẩm đã được thêm vào giỏ hàng
WISE-7144 CR Intelligent I/O Module with 8-ch DI, 8-ch DO and PoE (RoHS)
WISE-7144 CR: Bộ lập trình nhúng IoT Wise 8 kênh DI + 8 kênh DO
• Runs on browsers, no extra software tool is required.
• No more programming, Web pages provided for control logic editing.
• IF-THEN-ELSE logic rules execution ability.
• Built-in I/O (DI: 8-channels; DO: 8-channels).
• Support I/O channel monitoring/control, Timer.
• Support non-SSL Email sending and CGI Command sending operations.
• Modbus TCP Protocol for SCADA System Integration.
• IEEE 802.3af-compliant Power over Ethernet (PoE).
WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development. WISE-7144 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7144 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc. This module WISE-7144 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 8-channel isolated open collector outputs and 8-channel isolated wet contact digital inputs. Each output channel supports 300mA current driving +10 ~ 40 VDC and each digital input channel supports counter input.
|Protocol||• Modbus TCP
• CGI Command (Sending)
|Function||•Web Interface for Configuration
•IF-THEN-ELSE Logic operation (36 rules supported)
•I/O channel monitoring and control
•Timer operation (12 set supported)
•Internal Register operation (48 set supported)
•Recipe operation (12 set supported)
•Advanced P2P (8 set supported)
•non-SSL Email sending function
|CPU||16-bit CPU (80 MHz)|
|Intra-module Isolation||2500 VDC|
|EFT (IEC 61000-4-4)||±4 kV for Power Line|
|ESD (IEC 61000-4-2)||±4 kV Contact for each terminal and ±8 kV Air for random point|
|Status||1 x PoE Power
1 x System Running
1 x Ethernet Link/Act
1 x Ethernet 10/100M Speed
|Wet Contact, ON Voltage Level||+10 VDC ~ +50 VDC|
|Wet Contact, OFF Voltage Level||+4 VDC Max.|
|Max. Counts||16-bit (65535)|
|Min. Pulse Width||10 ms|
|Input Impedance||10 kΩ|
|Overvoltage Protection||+70 VDC|
|Type||Isolated Open Collector|
|Load Voltage||+10 VDC ~ +40 VDC|
|Max. Load Current||300 mA/Channel at 25 °C
Direct drive power relay module
|Overvoltage Protection||60 VDC|
|Overload Protection||1.4 A|
|Ports||RJ-45 x 1, 10/100 Base-TX and automatic MDI/MDI-X|
|Reverse Polarity Protection||Yes|
|Input Range||12 ~ 48 VDC|
|Powered from PoE||Yes, IEEE 802.3af, Class 1|
|Powered from Terminal Block||Yes, 12 ~ 48 VDC|
|Dimensions (mm)||72 x 123 x 35 (W x L x H)|
|Installation||DIN-Rail Mounting/Wall Mounting|
|Operating Temperature||-25 ~ +75 °C|
|Storage Temperature||-30 ~ +80 °C|
|Humidity||10 ~ 90% RH, Non-condensing|
|WISE-7144 CR||Intelligent I/O Module with 8-ch DI, 8-ch DO and PoE (RoHS)|