Tổng tiền thanh toán:
Sản phẩm đã được thêm vào giỏ hàng
WISE-7160 CR Intelligent I/O Module with 6-ch DI, 6-ch Power Relay and PoE (RoHS)
WISE-7160 CR: Bộ lập trình nhúng IoT Wise 6 kênh DI + 6 kênh đầu ra Relay
• Runs on browsers, no extra software tool is required.
• No more programming, Web pages provided for control logic editing.
• IF-THEN-ELSE logic rules execution ability.
• Built-in I/O (DI: 6-channels; DO: 6-channels Power Relay).
• Support I/O channel monitoring/control, Timer.
• Support non-SSL Email sending and CGI Command sending operations.
• Modbus TCP Protocol for SCADA System Integration.
• IEEE 802.3af-compliant Power over Ethernet (PoE).
WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development. WISE-7160 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7160 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc. This module WISE-7160 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 6 power relay outputs and 6 isolated wet contact digital inputs. Each power relay supports contact rating as 5 A @ 250 VAC or 5 A @ 30 VDC and each digital input channel supports counter input.
|Protocol||• Modbus TCP
• CGI Command (Sending)
|Function||•Web Interface for Configuration
•IF-THEN-ELSE Logic operation (36 rules supported)
•I/O channel monitoring and control
•Timer operation (12 set supported)
•Internal Register operation (48 set supported)
•Recipe operation (12 set supported)
•Advanced P2P (8 set supported)
•non-SSL Email sending function
|CPU||16-bit CPU (80 MHz)|
|Intra-module Isolation||2500 VDC|
|EFT (IEC 61000-4-4)||±2 kV for Power Line|
|ESD (IEC 61000-4-2)||±4 kV Contact for each terminal and ±8 kV Air for random point|
|Surge (IEC 61000-4-5)||±0.5 kV for Power Line|
|Status||1 x PoE Power
1 x System Running
1 x Ethernet Link/Act
1 x Ethernet 10/100M Speed
|Wet Contact, ON Voltage Level||+10 VDC ~ +50 VDC|
|Wet Contact, OFF Voltage Level||+4 VDC Max.|
|Max. Counts||16-bit (65535)|
|Min. Pulse Width||10 ms|
|Input Impedance||10 kΩ|
|Overvoltage Protection||+70 VDC|
|Type||Power Relay, Form A (SPST N.O.)|
|Contact Rating||5 A @ 250 VAC/24 VDC (Resistive Load)|
|Operate Time||10 ms (max.)|
|Release Time||5 ms (max.)|
|Mechanical Endurance||20,000,000 ops.|
|Ports||RJ-45 x 1, 10/100 Base-TX and automatic MDI/MDI-X|
|Reverse Polarity Protection||Yes|
|Input Range||12 ~ 48 VDC|
|Powered from PoE||Yes, IEEE 802.3af, Class 1|
|Powered from Terminal Block||Yes, 12 ~ 48 VDC|
|Dimensions (mm)||72 x 123 x 35 (W x L x H)|
|Installation||DIN-Rail Mounting/Wall Mounting|
|Operating Temperature||-25 ~ +75 °C|
|Storage Temperature||-30 ~ +80 °C|
|Humidity||10 ~ 90% RH, Non-condensing|
|WISE-7160 CR||Intelligent I/O Module with 6-ch DI, 6-ch Power Relay and PoE (RoHS)|