Module lập trình nhúng Wise IoT 8 kênh Power Relay ICP DAS WISE-7167 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

Intelligent I/O Module with 8-ch Power Relay

THÔNG TIN SẢN PHẨM

Features

• Runs on browsers, no extra software tool is required.
• No more programming, Web pages provided for control logic editing.
• IF-THEN-ELSE logic rules execution ability.
• Built-in I/O (DO: 8-channels Power Relay).
• Support I/O channel monitoring/control, Timer.
• Support non-SSL Email sending and CGI Command sending operations.
• Modbus TCP Protocol for SCADA System Integration.
• IEEE 802.3af-compliant Power over Ethernet (PoE).

Introduction

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development. WISE-7167 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7167 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc. This module WISE-7167 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 8-channel power relay outputs. Each power relay supports contact rating as 5 A @ 250 VAC or 5 A @ 30 VDC.

Specifications

Software
Protocol	• Modbus TCP • CGI Command (Sending)
Function	•Web Interface for Configuration •IF-THEN-ELSE Logic operation (36 rules supported) •I/O channel monitoring and control •Timer operation (12 set supported) •Internal Register operation (48 set supported) •Recipe operation (12 set supported) •Advanced P2P (8 set supported) •non-SSL Email sending function

CPU Module
CPU	16-bit CPU (80 MHz)

Isolation
Intra-module Isolation	3000 VDC

EMS Protection
EFT (IEC 61000-4-4)	±2 kV for Power Line
ESD (IEC 61000-4-2)	±4 kV Contact for each terminal and ±8 kV Air for random point
Surge (IEC 61000-4-5)	±0.5 kV for Power Line

LED Indicators
Status	1 x PoE Power 1 x System Running 1 x Ethernet Link/Act 1 x Ethernet 10/100M Speed

Relay Output
Channels	8
Type	Power Relay, Form A (SPST N.O.)
Contact Rating	5 A @ 250 VAC/24 VDC (Resistive Load)
Operate Time	10 ms (max.)
Release Time	5 ms (max.)
Electrical Endurance	100,000ops.
Mechanical Endurance	20,000,000 ops.

Ethernet
Ports	RJ-45 x 1, 10/100 Base-TX and automatic MDI/MDI-X
PoE	Yes

Power
Reverse Polarity Protection	Yes
Input Range	12 ~ 48 VDC
Consumption	3.3 W
Powered from PoE	Yes, IEEE 802.3af, Class 1
Powered from Terminal Block	Yes, 12 ~ 48 VDC

Mechanical
Dimensions (mm)	72 x 123 x 35 (W x L x H)
Installation	DIN-Rail Mounting/Wall Mounting

Environmental
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-30 ~ +80 °C
Humidity	10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering infromation

WISE-7167 CR

Intelligent I/O Module with 8-ch Power Relay and PoE (RoHS)

Module lập trình nhúng Wise IoT 8 kênh Power Relay ICP DAS WISE-7167 CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng