Module lập trình nhúng Wise IoT 4 kênh AI + 4 kênh AO + 4 kênh DI ICP DAS WISE-7504M CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

Intelligent MQTT I/O Module with 4-ch AI, 4-ch AO, 4-ch DI and 2-port Ethernet Switch

Gọi +84 904251826 để được trợ giúp

Module lập trình nhúng Wise IoT 4 kênh AI + 4 kênh AO + 4 kênh DI ICP DAS WISE-7504M CR

Features

• Runs on browsers, no extra software tool is required.
• No more programming, Web pages provided for control logic editing.
• IF-THEN-ELSE logic rules execution ability.
• Built-in I/O (AI: 4 Channels; AO: 4 Channels; DI: 4 Channels).
• Support I/O channel monitoring/control, Timer, Schedule operations.
• Support non-SSL Email sending and CGI Command sending operations.
• Modbus TCP Protocol for SCADA System Integration.
• MQTT Protocol for IT & IoT (Internet of Things) System Integration.
• IEEE 802.3af-compliant Power over Ethernet (PoE).
• 2-port Ethernet Switch for Daisy-Chain Topology.

Introduction

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the labor and cost spent on system development. WISE-7504M is a multi-function module with 4-channel analog inputs, 4-channel analog outputs and 4-channel digital inputs. It provides various programmable analog inputs, and analog outputs. Each analog input is allowed to configure a proper range with 240 Vrms high voltage protection. WISE-7504M follows IEEE 802.3af-compliant Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs. In additional to this, WISE-7504M also has a built-in two-port Ethernet switch to implement daisy-chain topology. The cabling is much easier and total costs of cable and switch are significantly reduced. By integrating with IF-THEN-ELSE rule engine, WISE-7504M provides more powerful functions such as I/O Monitoring/Control, Counter, Timer, Schedule, non-SSL E-mail sending & CGI Command sending for use in various industrial applications. WISE-7504M also supports Modbus TCP and MQTT protocol to make seamless integration with SCADA, IT and IoT (Internet of Things) system.

Specifications

Software
Protocol •Modbus TCP
•CGI Command (Sending)
•MQTT Client (non-SSL)
•Active I/O (MQTT Publish)
Function •Web Interface for Configuration
•IF-THEN-ELSE Logic operation (72 rules supported)
•I/O channel monitoring and control
•Timer operation (24 set supported)
•Schedule operation (24 set supported)
•Internal Register operation (48 set supported)
•Recipe operation (24 set supported)
•Advanced P2P (8 set supported)
•non-SSL Email sending function
•SNTP Time Synchronization

 

CPU Module
CPU 32-bit CPU (400 MHz)

 

Isolation
Intra-module Isolation 2500 VDC

 

EMS Protection
EFT (IEC 61000-4-4) ±2 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal and ±8 kV Air for random point
Surge (IEC 61000-4-5) ±2 kV for Power Line

 

LED Indicators
Status 1 x PoE Power
1 x System Running
1 x Ethernet Link/Act
12 x I/O Channel Status

 

Analog Input
Channels 4 (Differential)
Type ±500 mV, ±1 V, ±5 V, ±10 V
+0 mA ~ +20 mA, ±20 mA, 4 ~ 20 mA
(Jumper Selectable)
Resolution 16-bit
Accuracy ±0.1%
Sampling Rate 10 Samples/Second (Total)
Input Impedance Voltage: 2 MΩ
Current: 125 Ω
Common Mode Rejection 86 dB Min.
Normal Mode Rejection 100 dB
Common Voltage Protection ±200 VDC
Overvoltage Protection 240 Vrms
Overcurrent Protection Yes, 50 mA Max. at 110 VDC/VAC Max
Individual Channel Configuration Yes
Channel-to-Channel Isolation Yes, 400 VDC
Open Wire Detection Yes, for 4 ~ 20 mA only
Zero Drift ±20 μV/°C
Span Drift ±25 ppm/°C

 

Analog Output
Channels 4
Type +0 VDC ~ +5 VDC, ±5 VDC, +0 VDC ~ +10 VDC,±10 VDC
+0 mA ~ +20 mA, +4 mA ~ +20 mA
(Jumper Selectable)
Resolution 12-bit
Accuracy ±0.1% of FSR
Open Wire Detection Yes, for 4 ~ 20 mA only
Voltage Output Capability 20 mA @ 10 V
Current Load Resistance 400 Ω

 

Digital Input/Counter
Channels 4
Type Dry + Wet Contact
Wet Contact, ON Voltage Level +1 VDC Max.
Wet Contact, OFF Voltage Level +3.5 VDC ~ +30 VDC
Dry Contact, ON Voltage Level Close to GND
Dry Contact, OFF Voltage Level Open
Dry Contact, Effective Distance 500 M Max.
Max. Counts 16-bit (65535)
Frequency 50 Hz
Min. Pulse Width 10 ms
Overvoltage Protection +30 VDC

 

Ethernet
Ports RJ-45 x 2, 10/100 Base-TX, Swtich Ports (LED indicators)
PoE Yes

 

Power
Reverse Polarity Protection Yes
Input Range 12 ~ 48 VDC
Consumption 5.1 W
Powered from PoE Yes, IEEE 802.3af, Class 1
Powered from Terminal Block Yes, 12 ~ 48 VDC

 

Mechanical
Dimensions (mm) 97 x 120 x 42 (W x L x H)
Installation Wall Mounting

 

Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering infromation

WISE-7504M CR  Intelligent I/O Module with 2-port Ethernet Switch, 4-ch AI, 4-ch AO, 4-ch DI and PoE. Supports Modbus/TCP and MQTT (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: