Bộ thu thập và xử lý dữ liệu (Data logger) 2 kênh đo gia tốc (dao động, rung chấn, Accelerometer) ICP DAS AR-200 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

2-channel Accelerometer Data Logger device (RoHS)

Gọi +84 904251826 để được trợ giúp

AR-200 CR: Bộ thu thập và lưu trữ Data Logger 2 kênh đo Rung - gia tốc kế (Accelerometer)

Features

  • 2 or 4 simultaneous, 16-bit resolution ADC.
  • Support 2 or 4 IEPE input,and built-in 3 mA excitation current.
  • AR-200 support sample rate: 200kHz、100kHz、50kHz.
  • AR-400 support sample rate: 125kHz、100kHz、50kHz.
  • Max. Recording time:120 seconds.
  • Dynamic range:+/- 10V.
  • Flexible trigger modes: Push button trigger、Schedule trigger、analog threshold trigger、digital input trigger and utility remote trigger.
  • Supports 4 to 32 GB micro SDHC type flash.
  • Provide LED indicators.
  • 4 kV Contact ESD protection for any terminal.
  • Wide range of power input (+10 to +30 VDC) and operating temperature (-25 to 75°C).

Introduction

The AR-200/AR-400 series is a range of high-performance dynamic signal acquisition modules that are designed specifically for vibration monitoring and analysis. The maximum simultaneous sampling rate for each channel on the AR-200 and AR-400 is up to 200k-Hz and 125k-Hz respectively. The AR-200/AR-400 modules include a built-in 3mA excitation current to power the Integrated Electronics Piezo-Electric (IEPE) accelerometers and a 16-bit A/D converter. The data acquired by the AR-200/AR-400 is saved on a Micro SD card that can be used for offline vibration analysis. ICP DAS also provides a utility that can be installed on the Host PC that can be easily configured for different triggering modes, as well as changing the sampling rate, and scheduling the sampling time for various applications using the development tools. Consequently, the AR-200/AR-400 modules are recommended as your best choice for vibration monitoring and measurement.
 

Specifications

Data Logger Capability
Recording Format Binary
Storage Media Micro SDHC type flash – support 4 to 32 GB

 

LED Indicators
Status 1 x PWR
1 x DAQ
1 x SD

 

Analog Input
Channels 2 (simultaneous sampling)
Type 3 mA
Resolution 16 bit
Sampling Rate 50, 100, 200
Trigger Mode Push button trigger、Schedule trigger、Analog threshold trigger、 Digital input trigger、Utility Remote trigger

 

Digital Input
Channels 2, Dry Contact: Source x 1, Wet Contact: Sink or Source x 1
Wet Contact, ON Voltage Level +10 VDC to +50 VDC
Wet Contact, OFF Voltage Level +4 VDC max
Dry Contact, ON Voltage Level Close to GND
Dry Contact, OFF Voltage Level Open

 

Digital Output
Channels 1, Power Relay

 

Relay Output
Channels Form A x 1

 

Ethernet
Ports 1 x RJ-45, 10/100Base-T(X)

 

Power
Consumption 4.3 W

 

Mechanical
Dimensions (mm) 197 x 139 x 57 (W x L x H)
Installation Wall Mount

 

Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ 80 °C
Humidity 10 ~ 90% RH, non-condensing

Download

Data sheet

Documents

Ordering infromation

AR-200     CR  2-channel Accelerometer Data Logger device (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: