Module EtherNet/IP đầu vào tương tự AI 8 kênh DIFF / 16 kênh SE ICP DAS EIP-2217 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

EtherNet/IP Module (Isolated 8-ch DIFF / 16-ch SE Analog Input)

Gọi +84 904251826 để được trợ giúp

Module EtherNet/IP đầu vào tương tự AI 8 kênh DIFF / 16 kênh SE ICP DAS EIP-2217 CR

Features

  • Transfer protocol: EtherNet/IP
  • Powerful 32-bit MCU handles efficient network traffic
  • Easy firmware update via Ethernet
  • Analog Input
    • Differential: 8 Channels
    • Single ended: 16 Channels
  • 2-port Ethernet Switch (LAN Bypass) for Daisy-Chain Wiring

Introduction

The EIP-2000 is an industrial remote I/O module series supporting the EtherNet/IP protocol. Users can seamlessly integrate these modules into the Ethernet network from the industrial floor to the enterprise. The EIP-2000 allows daisy chain connection which permits the flexibility in locating devices, eases installation and lowers infrastructure costs. All the modules can be deployed in the network topologies such as star, line or ring. The isolation design protects the EIP-2000 against the harmful interference. The EIP-2217 is an 8-ch Differential and 16-ch Single-Ended AI module. The module provides a jumper to switch Differential and Single-Ended mode. It supports voltage and current input type. The accuracy of the measurement is smaller than 0.1% FSR. The Module is designed as an EtherNet/IP adapter. Users can obtain the input status as well as the connection status of the EIP-2217 by the LEDs indication. In addition, ICPDAS provides software utility to easily configure and test the EIP-2000 modules via Ethernet.

Applications

  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote diagnosis
  • Testing Equipment

Specifications

CPU Module
CPU 32-bit ARM
Watchdog Timer Module, Communication (Programmable)
Isolation
2-way Isolation Ethernet: 1500 VDC
I/O: 3000 VDC
EMS Protection
EFT (IEC 61000-4-4) ±4 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
±8 kV Air for Random Point
Surge (IEC 61000-4-5) ±2 kV for Power Line
LED Indicators
Status Run, Ethernet
Analog Input
Channels 8-ch differential or 16-ch single-ended
Type Type Voltage: ±150 mV, ±500 mV, ±1 V, ±2.5 V, ±5 V, ±10 V
Current: ±20 mA, 0 ~ +20 mA, +4 ~ +20 mA
(DIP switch selectable - see Note 1)
Resolution 16-bit
Accuracy Normal Mode: ±0.1% of FSR
Fast Mode: ±0.5% of FSR
Sampling Rate Normal Mode: 20 Hz (total channels)
Fast Mode: 200 Hz (total channels)
Input Impedance Voltage: 2 MΩ (Differential), 1 MΩ (Single-ended)
Current: 137 Ω (Differential)
Common Voltage Protection ±200 VDC
Overvoltage Protection 120 VDC
Individual Channel Configuration Yes
Open Wire Detection For 4 to 20 mA only
Ethernet
Ports 10/100 Base-TX, 8-pin RJ-45 x 2
Support daisy chain connection.
LAN bypass Yes
Protocol Ethernet/IP (Adapter)
Power
Reverse Polarity Protection Yes
Consumption 3.3W
Powered from Terminal Block +10 to +48 VDC
Mechanical
Casing Metal
Dimensions (mm) 33 x 127 x 117 (W x L x H)
Installation DIN-Rail mounting / Wall mounting (Optional ASO-0015)
Environment
Operating Temperature -25 ~ +75 ℃
Storage Temperature -40 ~ +80 ℃
Humidity 10 ~ 90% RH, Non-condensing

Specification Memo

Note 1: Differential wiring can be used for both voltage input and current input. Single-ended wiring can only be used for voltage input.

Download

Datasheet

Documents

Ordering Information

EIP-2217  CR  EtherNet/IP Module (Isolated 8-ch DIFF / 16-ch SE Analog Input) (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: