|
System |
|
Processor |
4-core 64-bit ARM Cortex-A55, clocked at 2GHz |
|
OS |
Debian10 (Linux4.19.219) |
|
Memory |
2GB DDR4 |
|
Storage |
8GB eMMC |
|
Software |
|
Industrial BUS |
Support Modbus RTU Master, Modbus RTU Slave, Modbus ASCII Master, Modbus ASCII Slave, UDP Client, UDP Server, UDP Multicast, TCP Server, TCP Client, RealCOM_MCP, RealCOM_CCP, RealCOM_MW, Pair Connection Master, Pair Connection Slave, HTTPD Client, WebSocket Client, MQTT and other serial port to network modes
Support serial port forwarding, RFC2217
Support Modbus slave mapping, Modbus pre-reading, and Modbus address mapping batch reading and writing
Supports CAN-to-network modes such as UDP Client, UDP Server, UDP Multicast, TCP Server, TCP Client, Pair Connection Master, Pair Connection Slave, Modbus TCP Slave, HTTPD Client, WebSocket Client, MQTT, etc.
Support packet length, packet interval, heartbeat packet, SSL encryption, and data encryption
Support CAN ID filtering and restart without data |
|
I/O Controller |
Support DI, DO, AI detection and DO control
DO supports restart hold, AI supports current type 4-20mA and voltage type 0-10V
Support Modbus TCP instructions to read data and control, DI supports 02 function code, DO supports 01/05/0F function code, and AI supports 04 function code |
|
Routing Function |
Support 4G/5G cellular network or Wi-Fi6 wireless client optional
Support static routing, link check, network diagnosis
Support port forwarding, access control, custom rules, DMZ, QoS
Support VPN clients and servers, dynamic DNS, and cloud services |
|
Switching |
Support port configuration, port speed limit, storm suppression, storm detection, port aggregation, LACP, port statistics
Support 8021.QVLAN, port isolation, static unicast MAC binding
Support fast ring network, ERPS, RSTP
Support IGMP-Snooping, static multicast MAC binding
Support ACL, 802.1X authentication, email logs, alarms, and loopback detection
Support SNMP, RMON, LLDP, port mirroring, network diagnostics, optical module DDM |
|
System Management |
Support WEB, Telnet, SSH access control
WAN supports DHCP, static address, PPPoE connection
Support DNS, LAN DHCP server
Support local/network clock synchronization, automatic adjustment to daylight saving time, system logs, scheduled tasks, and certificate management
Support scheduled/immediate restart, configuration file upload and download, and system upgrade |
|
Wi-Fi Radio Frequency Parameters (MaxGate800-W) |
|
Wireless Standards |
IEEE802.11b/g/n/ac/ax |
|
Working Frequency |
2.4GHz~2.4835GHz、5.15GHz~5.835GHz |
|
Modulation |
CCK, DQPSK, DBPSK, BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM |
|
Band Bandwidth |
20MHz/40MHz/80MHz |
|
Theoretical Transfer rate |
2.4GHz：574Mbps
5GHz：1201Mbps |
|
Max. TX Power |
802.11b：18±1.5dBm
802.11g：15±1.5dBm
802.11n HT20/HT40：15±1.5dBm
802.11ac HT80：13±1.5dBm |
|
RX Sensitivity |
1Mbps: -95dBm@PER＜8%
11Mbps: -88dBm@PER＜8%
54Mbps: -73dBm@PER＜10%
65Mbps: -71.5dBm@PER＜10%
1201Mbps: -65dBm@PER＜10% |
|
Cellular Network |
4G(MaxGate800-4G) |
5G(MaxGate800-5G) |
|
Network Format |
LTE-FDD, LTE-TDD, WCDMA, GSM |
5G NR SA/NSA, LTE-FDD, LTE-TDD, WCDMA |
|
Working Frequency |
LTE-FDD: B1/3/5/8
LTE-TDD: B34/38/39/40/41
WCDMA: B1/5/8
GSM: 900/1800MHz |
5G NR SA: n1/28/41/77/78/79
5G NR NSA: n41/78/79
LTE-FDD: B1/2/3/5/7/8/20/28
LTE-TDD: B34/38/39/40/41
WCDMA: B1/2/5/8 |
|
MIMO |
/ |
DL 4 × 4: n1/n41/n77/n78/n79
UL 2 × 2: n41/n77/n78/n79
DL 2 × 2: n28/LTE |
|
Theoretical Transfer rate |
- LTE-FDD:
DL 150Mbps/ UL 50Mbps
- LTE-TDD:
DL 130Mbps/ UL 30Mbps
- UMTS(HSPA+/HSUPA)：
DL 21Mbps/ UL 5.76Mbps
- WCDMA: DL/ UL 384 kbps
- GRPS: DL/ UL 85.6kbps
- EDGE: DL/ UL 236.8kbps
|
- 5G SA Sub-6:
DL 2Gbps/ UL 1Gbps
- 5G NSA Sub-6:
DL 2.2Gbps/UL 575Mbps
- LTE: DL 600Mbps/UL 150Mbps
- UMTS(DC-HSDPA/HSUPA):
DL 42.2Mbps/ UL 11Mbps
- WCDMA: DL/ UL 384 kbps
|
|
Max. TX Power |
- LTE-FDD: 23dBm±2dB
- LTE-TDD: 23dBm±2dB
- WCDMA: 24dBm+1/-3dB
- DCS1800(8-PSK):
26dBm±3dB
- EGSM900(8-PSK):
27dBm±3dB
- DCS1800: 30dBm±2dB
- EGSM900: 33dBm±2dB
|
- 5G NR n1/41: 23dBm±2dB
- 5G NR n28: 23dBm+2/-2.5dB
- 5G NR n77/78/79:
23dBm+2/-3dB
- 5G NR n41/n78/n79 HPUE: 26dBm+2/-3dB
- LTE: 23dBm±2Db(LTE-TDD B41 HPUE: 26dBm±2dB)
- WCDMA: 23dBm±2dB
|
|
RX Sensitivity |
- LTE-FDD(10MHz):
-97dBm(B1)/ -97.5dBm(B3)/
-98dBm(B5)/ -98dBm(B8)
- LTE-TDD(10MHz):
-96.5dBm(B34)/ -97dBm(B38)/
-97dBm(B39)/ -97dBm(B40)/
-96dBm(B41)
- WCDMA:
-108dBm(B1)/ -109dBm(B5)/
-110dBm(B8)
- DCS1800: -108dBm
- EGSM900: -108dBm
|
- 5G NR FDD(5MHz):
-106.5dBm(n1)/-101dBm(n28)
- 5G NR TDD(100MHz)：
-92.5dBm(n41)/-92.5dBm(n77)/
-93dBm(n78)/ -92.5dBm(n79)
- LTE-FDD(10MHz):
-101.5dBm(B1)/ -100dBm(B2)/
-100.5dBm(B3)/-100.6dBm(B5)/
-97.5dBm(B7)/ -101dBm(B8)/
-101.5dBm(B20)/-101dBm(B28)
- LTE-TDD(10MHz):
-99.5dBm(B34)/-99.3dBm(B38)/
-100.3dBm(B39)/
-98.5dBm(B40)/-99.3dBm(B41)
- WCDMA:
-112.8dBm(B1)/-112.5dBm(B2)/
-113dBm(B5)/-113.2dBm(B8) |
|
Interface |
|
1G Fiber Port |
2×1000Base-X Gigabit SFP slots |
|
1G Copper Port |
8×10/100/1000Base-T(X) auto-sensing Gigabit copper ports, supporting full/half duplex, auto MDI/MDI-X connection, among which G1 is the WAN port and the others are LAN ports |
|
Serial |
Serial port type: 12×RS485
Connection method: 2 10-position 3.5mm pitch terminal blocks with locks
Baud rate: 300bps~460800bps
Data bits: 7bit, 8bit
Stop bit: 1bit, 2bit
Check digit: None, odd parity, even parity |
|
CAN |
Number of channels: 4×CAN
Connection method: 2×10-position 3.5mm pitch terminal blocks with locks
Baud rate: 5kbps~1000kbps |
|
Digital Input |
Number of channels: 16×DI inputs
Connection method: 2×10-position 3.5mm pitch terminal blocks with locks
Signal type: NPN
Level range: wet contact (logic level 0: DC18~30V external power input;
logic level 1: no external power input)
dry contact (logic level 0: shorted to ground;
logic level 1: floating) |
|
Digital Output |
Number of channels: 8×DO outputs
Connection method: 2×10-position 3.5mm pitch terminal blocks with locks
Output type: relay output (dry contact)
Output mode: normally open
Contact impedance: 2.0A @24VDC
Contact resistance: ≤100mΩ
Initial insulation resistance: 1000MΩ (min.) @500VDC
Electrical life: 50,000 operations (rated load) |
|
Analog Input |
Number of channels: 2×AI inputs
Connection method: 210 positions 3.5mm pitch with locking terminal blocks, AI occupies 2×2 positions
Input mode: voltage mode (0~10VDC), current mode (4mA~20mA)
Noise-free resolution: 12 bits
Accuracy: 1% |
|
Wi-Fi Antenna |
2×SMA-K (external thread internal hole) antenna interface, used to connect 2.4GHz/5GHz dual-band Wi-Fi antenna
(MaxGate800-W) |
|
4G Antenna |
1×SMA-K (external thread internal hole) antenna interface for connecting to 4G cellular antenna
(MaxGate800-4G) |
|
5G Antenna |
4×SMA-K (external thread internal hole) antenna interface for connecting to 5G cellular antennas
(MaxGate800-5G) |
|
SIM Card |
1×dual Nano SIM card slot, dual SIM card single standby (MaxGate800-4G, MaxGate800-5G) |
|
CONSOLE |
1×CONSOLE port, using Type-C USB interface, used for device debugging |
|
USB |
1×Type-A USB 2.0 interface (HOST), expandable storage |
|
HDMI |
1×HDMI interface, supports 1080p@120Hz or 4096x2304@60Hz video output |
|
Button |
Restart or restore factory settings with one click |
|
Indicator |
Power indicator, operation indicator, alarm indicator, Ethernet interface indicator, copper port speed indicator, network indicator, CELL indicator, CAN indicator, serial port indicator |
|
Power Supply |
|
Input Voltage |
DC12~48V, supports dual power supply redundancy, no polarity |
|
Power Consumption |
<22W@DC24V (5G) |
|
Connection |
5-position 5.08mm pitch lock terminal block |
|
Physical Characteristics |
|
Dimensions |
160×100×128 mm (excluding DIN-rail mounting clip) |
|
Installations |
35mm standard DIN rail installation |
|
IP Code |
IP40 |
|
Weight |
About 1.75kg (excluding antenna) |
|
Working Environment |
|
Operating Temp |
-40℃~+75℃ (MaxGate800-5G: -40℃~+60℃) |
|
Storage Temp |
-40℃~+85℃ |
|
Relative Humidity |
5%~95% (no condensation) |
|
Industry Standard |
|
EMC |
IEC 61000-4-2 (ESD): Level 4 (contact discharge ±8kV, air discharge ±15kV)
IEC 61000-4-5 (Surge): Level 3 (power supply: common mode ±2kV, differential mode ±2kV;
Network port: common mode ±6kV, differential mode ±2kV;
Serial port, CAN: common mode ±4kV, differential mode ±2kV)
IEC 61000-4-4 (EFT): Level 4 (power supply: ±4kV; communication port: ±2kV) |
