Card PCI Express 32 kênh DI + 32 kênh DO ICP DAS PEX-730A CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

PCI Express, 32-ch Isolated DI and 32-ch DO (Source, PNP) Board

Gọi +84 904251826 để được trợ giúp

Card PCI Express 32 kênh DI + 32 kênh DO ICP DAS PEX-730A CR

Features

  • Support PCI Express x1
  • 16-channel Optically-isolated Digital Input
  • 16-channel Optically-isolated Digital Output (Source, PNP)
  • 16-channel 5 V/TTL Digital Output
  • 16-channel 5 V/TTL Digital Input
  • 3750 Vrms photo-isolation protection
  • Two Interrupt sources
  • Card ID Function(SMD Switch)
  • Digital Output status readback

Introduction

The PEX-730A cards provide 32 isolated Digital I/O channels (16 x DI and 16 x DO) and 32 TTL-level Dgital I/O channels (16 x DI and 16 x DO). Both the isolated DI and DO channels use a short optical transmission path to transfer an electronic signal between the elements of a circuit and keep them electrically isolated. With 3750 Vrms isolation protection, the DIO channels allow the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltage spikes. Each Digital Output includes a PNP transistor and integral suppression diode for the inductive load. The open-collector Digital Output channels are typically used for alarm and warning notification, signal output control, control for external circuits that require a higher voltage level, and signal transmission applications, etc.

PEX-730A cards also add a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more cards in one computer.

The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.

Accessories

Specification

Hardware
Card ID Yes (4-bit)
Connector Female DB37 x 1
20-pin box header x 2

 

Digital Input
Channels 16 (Isolated) + 16 (Non-isolated )
Type Isolated: Photocoupler (Sink and Source)
Non-isolated: 5V/TTL
TTL Input, ON Voltage Level 2.0 V Min.
TTL Input, OFF Voltage Level 0.8 V Max.
Response Speed 4 kHz (Typical) (Isolated)
500 kHz (Non-isolate)
Trigger Mode Static Update
Wet Contact, ON Voltage Level 9 ~ 24 V
(Min. 7 V; Max. 30 V)
Wet Contact, OFF Voltage Level 0 ~ 1 V
Isolation 3750 Vrms (Isolated)

 

Digital Output
Channels 16 (Isolated) + 16 (Non-isolated )
Type Isolated: Source (PNP), Open Emitter
Non-isolated: 5V/TTL
Operation Mode Static Update
Voltage Non-isolated:
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Max. Load Current 100 mA/+30 V for each channel @ 100% duty(Isolated)
Sink: 2.4 mA @ 0.8 V(Non-isolated)
Source: 0.8 mA @ 2.0 V(Non-isolated)
Response Speed 4 kHz (Typical) (Isolated)
500 kHz (Typical) (Non-isolated)
Isolation 3750 Vrms (Isolated)

 

PC Bus
Type PCI Express x 1
Data Bus 8-bit

 

Power
Consumption 350 mA @ +3.3 V
250 mA @ +12 V

 

Mechanical
Dimensions (mm) 110 x 163 x 22 (W x L x D)

 

Environmental
Operating Temperature 0 ~ +60°C
Storage Temperature -20 ~ +70°C
Humidity 5 ~ 85% RH, Non-condensing

Download

Manual

Data sheet

Odering Information

PEX-730A     CR  PCI Express, 32-ch Isolated Digital I/O and 32-ch Digital I/O Board (Current Sourcing, PNP) (RoHS)
Includes one CA-4002 D-Sub connector

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: