Card PCI Express 16 kênh đầu vào số DI + 16 kênh đầu ra PhotoMos Relay ICP DAS PEX-P16POR16i CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

PCI Express, 16-ch Isolated DI and 16-ch PhotoMOS Relay Output Board

Gọi +84 904251826 để được trợ giúp

Card PCI Express 16 kênh đầu vào số DI + 16 kênh đầu ra PhotoMos Relay ICP DAS PEX-P16POR16i CR


  • Supports PCI Express x1
  • Selectable DC signal input filter
  • AC signal input with filter
  • LED power indicator
  • Long life and high reliability PhotoMOS Relay
  • Low leakage current when PhotoMOS Relay is OFF
  • No contact bounce, no sparking
  • No acoustical noise
  • 16 PhotoMos Relay output channels
  • 16 Optically-isolated Digital Input channels
  • Card ID Function(SMD Switch)
  • Digital Output status readback
  • 2000 VDC photo-isolation protection




The PEX-P16POR16i is a PCI Express card. These cards provide 16 optically isolated input channels and 16 PhotoMOS Relay output channels. Both the isolated DI channels and the PhotoMOS Relay channels use a short optical transmission path to transfer an electronic signal between elements of a circuit and keep them electrically isolated. The PEX-P16POR16i card provide 2000 VDC for DI channel isolation protection, allowing the input signals to be completely floated so as to cut down ground loops, block voltage spikes, and isolate the host computer from damaging voltages. PhotoMOS Relays are used where it is necessary to control a circuit using a low-power signal (with complete electrical isolation between the control and controlled circuits), or where several circuits must be controlled by one signal. These cards can be used in various applications, such as controlling the ON/OFF state of external devices, driving external relays or small power switches, activating alarms, contact closure, sensing external voltages or switches, etc.

The PEX-P16POR16i card also adds a Card ID switch on-board. Users can set Card ID and then recognizes the board by the ID via software when using two or more cards in one computer.

The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.



Card ID Yes (4-bit)
Connector Female DB37 x 1
40-pin box header x 1


Digital Input
Channels 16
Type Photocoupler (Sink and Source)
Response Speed Without Filter: 50 kHz (Typical)
With Filter: 0.455 kHz(Typical)
Trigger Mode Static Update
Wet Contact, ON Voltage Level AC/DC 5 ~ 24 V (AC 50 ~ 1 kHz)
Wet Contact, OFF Voltage Level AC/DC 0 ~ 1 V
Isolation 2000 VDC


Relay Output
Channels 16
Type PhotoMos Relay (Form A)
Contact Rating Load Voltage: 300 V (AC peak or DC)
Load Current: 130 mA
Operate Time 0.7 ms (Typical)
Release Time 0.05 ms (Typical)
Electrical Endurance Long Life and No Sparking


PC Bus
Type PCI Express x 1
Data Bus 16-bit


Consumption 600 mA @ +3.3 V
300 mA @ +12 V


Dimensions (mm) 113 x 118 x 22 (W x L x D)


Operating Temperature 0 ~ +60°C
Storage Temperature -20 ~ +70°C
Humidity 5 ~ 85% RH, Non-condensing



Data Sheet

Odering information

PEX-P16POR16i     CR  PCI Express x1, 16-channel isolated digital input and 16-channel PhotoMOS Relay output (RoHS)
Includes one CA-4037W cable and two CA-4002 D-Sub connectors

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: